Whiteline front and rear swaybar kit
Key specs
- PositionFront & rear
- Install time4 hours
- Supplied as1 kit
- Bar sizes30mm front / 22mm rear4 point adjustable front, 4 point adjustable rear
- Solid spring steel
- Sway bar links included
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this swaybar kit
The Whiteline BHK003 front and rear sway bar kit is designed to improve grip and boost stability, a complete, premium upgrade. It is a packaged solution designed to improve performance and enhance the driving experience. Upgrading the sway bars minimises excess body roll and dramatically improves handling performance, steering response and braking stability and response.
Engineered to 'Activate More Grip', BHK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 30mm 4-point adjustable front sway bar and 22mm 4-point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.
Kit Contains:
BHF17Z and BHR16Z - essential to 'Activate more grip'
- Front Sway bar - 30mm 4-point adjustable
- Rear Sway bar - 22mm 4-point adjustable
Application
- HOLDEN COMMODORE 1993-2000 - VR, VS WAGON AND UTE
- HOLDEN COMMODORE 1993-1997 - VR, VS
- HSV CLUBSPORT 1993-1997 - VR, VS WAGON
- HSV MALOO 1993-2000 - VR, VS
- HSV MANTA 1995-1997 - VS WAGON
- TOYOTA LEXCEN 1993-1997 - T2 WAGON
- TOYOTA LEXCEN 1993-1997 - T2 SOLID AXLE
Whiteline BHK003
Sway bar settings
Front bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 29mm | +15% |
| Medium | Balanced | 30mm | +30% |
| Hard | Maximum roll control | 31mm | +50% |
Rear bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 20mm | 0% |
| Medium | Balanced | 21mm | +20% |
| Intermediate | Sport | 22mm | +45% |
| Hard | Maximum roll control | 23mm | +75% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
Whiteline BHK003
Specifications
Kit
| Kit type | Front and Rear Swaybar Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Sway Bars, 4 Links, 8 Bushings, 2 Brackets, 6 Bolts, 18 Washers, 14 Nuts |
Fitting
| Fitting position | Front & Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | BHK003 |
|---|---|
| EAN | 9319924396955 |
Sway bars in this kit
| Location | Sway Bar | Diameter (mm) | Material | Sway Bar Adjustment Type | Sway Bar Link Included |
|---|---|---|---|---|---|
| Front | BHF17Z | 30 | Solid Spring Steel | 4 Point Adjustable | Yes |
| Rear | BHR16Z | 22 | Solid Spring Steel | 4 Point Adjustable | Yes |
What's in the kit
Every part in this kit, matched to your choices
-
Front Sway bar - 30mm 4point adjustable× 1
-
Rear Sway bar - 22mm 2 point adjustable× 1
-
Includes mounting hardware
Factory brackets, nuts and bolts may be reused from your vehicle.
Whiteline warranty (sway bars)
Lifetime warranty
Sway bar links
3 year / 60,000kmThe Whiteline sway bars in this kit are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the part was installed on. The links are covered for 3 years or 60,000km, whichever comes first. If a claim is approved, a replacement part is supplied at no cost.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BHK003
Vehicle fitment
9 vehicles
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreVS Aero | 1995–1997 | Front & rear |
| HDT CommodoreVS Magnum | 1995–1997 | Front & rear |
| Holden CommodoreVR, VS SedanSuits solid axle models | 1993–1997 | Front & rear |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Front & rear |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Front & rear |
| HSV MalooVR, VS | 1993–2000 | Front & rear |
| HSV MantaVS WAGON | 1995–1997 | Front & rear |
| Toyota LexcenVR, VS SedanSuits solid axle models | 1993–1997 | Front & rear |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Front & rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
