Whiteline rear sway bar
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit
- Bar diameter22mm4 point adjustable
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar
The Whiteline BHR16Z rear sway bar is engineered for precision and balance and maintains optimal suspension geometry under load, the perfect, complete upgrade. Sway bars are principally designed to reduce body roll, spreading lateral loads more evenly across the tyres for more cornering grip and better outright performance. Whiteline calls it the best dollar-for-dollar handling improvement you can make to your vehicle.
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 4 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Application
- HOLDEN CALAIS 1985-1988 - VK, VL
- HOLDEN CALAIS 1988-1991 - VN
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL (INCL HDT)
- HOLDEN COMMODORE 1988-1993 - VN, VP, VG WAGON AND UTE
- HOLDEN COMMODORE 1988-1993 - VN, VP
- HOLDEN COMMODORE 1993-2000 - VR, VS WAGON AND UTE
- HOLDEN COMMODORE 1993-1997 - VR, VS
- HSV CLUBSPORT 1989-1991 - VN
- HSV CLUBSPORT 1993-1997 - VR, VS WAGON
- HSV COMMODORE 1988-1989 - GROUP A VL
- HSV COMMODORE 1989-1991 - VN, VP
- HSV COMMODORE 1989-1993 - GROUP A VN
- HSV MALOO 1990-1993 - VG, VP
- HSV MALOO 1993-2000 - VR, VS
- HSV MANTA 1995-1997 - VS WAGON
- TOYOTA LEXCEN 1989-1993 - T1 WAGON
- TOYOTA LEXCEN 1989-1993 - T1 SOLID AXLE
- TOYOTA LEXCEN 1993-1997 - T2 WAGON
- TOYOTA LEXCEN 1993-1997 - T2 SOLID AXLE
Whiteline BHR16Z
Sway bar settings
Bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 20mm | 0% |
| Medium | Balanced | 21mm | +20% |
| Intermediate | Sport | 22mm | +45% |
| Hard | Maximum roll control | 23mm | +75% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
Whiteline BHR16Z
Specifications
Kit
| Kit type | Rear Sway Bar - 22mm 4 Point Adjustable |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Links, 2 Bushings, 2 Brackets, 4 Bolts, 10 Washers, 4 Nuts |
Sway bar
| Diameter (mm) | 22 |
|---|---|
| Diameter (in) Fraction | 7/8" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | 4 Point Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | BHR16Z |
|---|---|
| EAN | 9319924012688 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BHR16Z
Vehicle fitment
25 vehicles
- 22mm 4 Point Adjustable
| Vehicle | Years | Position |
|---|---|---|
| HDT CalaisVK, VL | 1984–1986 | Rear |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Rear |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Rear |
| HDT CommodoreVS Aero | 1995–1997 | Rear |
| HDT CommodoreVS Magnum | 1995–1997 | Rear |
| Holden CalaisVK, VL | 1984–1988 | Rear |
| Holden CalaisVN | 1988–1991 | Rear |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Rear |
| Holden CommodoreVN, VP SedanSuits solid axle models | 1988–1993 | Rear |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Rear |
| HSV ClubsportVN | 1989–1991 | Rear |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Rear |
| HSV CommodoreVL GROUP A | 1988–1989 | Rear |
| HSV CommodoreVN GROUP A | 1990–1991 | Rear |
| HSV CommodoreVN, VP | 1989–1993 | Rear |
| HSV LSVG, VP | 1991–1993 | Rear |
| HSV MalooVG, VP | 1990–1993 | Rear |
| HSV MalooVR, VS | 1993–2000 | Rear |
| HSV MantaVS WAGON | 1995–1997 | Rear |
| Toyota LexcenVN, VP SedanSuits solid axle models | 1987–1993 | Rear |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front