Whiteline rear 20mm sway bar
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit
- Bar diameter20mmNon adjustable
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this 20mm sway bar
The Whiteline BHR7X rear sway bar is designed to reduce body roll, keeping your vehicle flatter through corners, the perfect, complete upgrade. Sway bars are principally designed to reduce body roll, spreading lateral loads more evenly across the tyres for more cornering grip and better outright performance. The gains extend to handling, safety and tyre wear without affecting ride quality or comfort.
Whiteline BHR7X
Specifications
Kit
| Kit type | Rear 20mm Sway Bar |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Links, 10 Bushings, 2 Saddles, 2 Plates, 2 Mounts, 2 U-Bolts, 2 Bolts, 10 Washers, 14 |
Sway bar
| Diameter (mm) | 20 |
|---|---|
| Diameter (in) Fraction | 51/64" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | Non Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | BHR7X |
|---|---|
| EAN | 9319924013098 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BHR7X
Vehicle fitment
6 vehicles
- 20mm Non Adjustable
| Vehicle | Years | Position |
|---|---|---|
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Rear |
| Holden H SeriesHX, HZ SEDAN AND WAGONSuits HX models | 1976–1980 | Rear |
| Holden MonaroHQ, HJ | 1971–1976 | Rear |
| Holden MonaroHX, HZSuits HX models | 1976–1980 | Rear |
| Holden StatesmanHQ, HJ | 1971–1976 | Rear |
| Holden StatesmanHX, HZSuits HX models | 1976–1980 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
