Whiteline rear sway bar
Key specs
- PositionRear axle
- Install time1 hour
- Supplied as1 kit1 sway bar, 2 bushings, 2 lateral locks
- Bar diameter22mm3 point adjustable
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar
The Whiteline BHR82XZ rear sway bar is designed to perform under extreme conditions, delivering long-lasting, reliable performance, the perfect, complete upgrade. Sway bars are principally designed to reduce body roll, spreading lateral loads more evenly across the tyres for more cornering grip and better outright performance. The gains extend to handling, safety and tyre wear without affecting ride quality or comfort.
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3-point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Application
- HOLDEN CALAIS 2006-2013 - VE
- HOLDEN CALAIS 2013-2018 - VF
- HOLDEN CAPRICE 2006-2013 - WM
- HOLDEN CAPRICE 2013-2018 - WN
- HOLDEN COMMODORE 2006-2013 - VE
- HOLDEN COMMODORE 2013-2017 - VF
- HOLDEN STATESMAN 2006-2013 - WM
- HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
- HSV CLUBSPORT 2013-2017 - F
- HSV GRANGE 2006-2013 - GRANGE WM
- HSV GRANGE 2013-2016 F
- HSV GTS 2006-2013 - E SERIES
- HSV GTS 2013-2017 - GTS GEN F
- HSV SENATOR 2006-2013 - SENATOR E SERIES
- HSV SENATOR 2013-2017 - SENATOR GEN F
- HSV W427 2008-2009 - W427 E SERIES
Whiteline BHR82XZ
Sway bar settings
Bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 21mm | -15% |
| Medium | Balanced | 22mm | 0% |
| Hard | Maximum roll control | 23mm | +20% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
Whiteline BHR82XZ
Specifications
Kit
| Kit type | Rear Sway Bar - 22mm 3 Point Adjustable |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Bushings, 2 Lateral Locks |
Sway bar
| Diameter (mm) | 22 |
|---|---|
| Diameter (in) Fraction | 7/8" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | 3 Point Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | BHR82XZ |
|---|---|
| EAN | 9319924347186 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BHR82XZ
Vehicle fitment
24 vehicles
- 22mm 3 Point Adjustable
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreInterceptor Retro | 2006–2013 | Rear |
| HDT CommodoreVC Retro | 2006–2013 | Rear |
| HDT CommodoreVH Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2006–2013 | Rear |
| HDT CommodoreVK RetroSuits models with ball links | 2015–2017 | Rear |
| HDT CommodoreVL Retro | 2006–2013 | Rear |
| Holden CalaisVE | 2006–2013 | Rear |
| Holden CalaisVFSuits models with ball links | 2013–2018 | Rear |
| Holden CapriceWM | 2006–2013 | Rear |
| Holden CapriceWNSuits models with ball links | 2013–2017 | Rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Rear |
| Holden CommodoreVF Sedan, Wagon and UteSuits models with ball links | 2013–2017 | Rear |
| Holden StatesmanWM | 2006–2010 | Rear |
| HSV ClubsportE SERIES | 2006–2013 | Rear |
| HSV ClubsportGEN FSuits models with ball links | 2013–2017 | Rear |
| HSV GrangeWM | 2007–2013 | Rear |
| HSV GrangeWNSuits models with ball links | 2013–2016 | Rear |
| HSV GTSE SERIES | 2006–2013 | Rear |
| HSV GTSGEN FSuits models with ball links | 2013–2017 | Rear |
| HSV GTSGTSR GEN FSuits models with ball links | 2013–2017 | Rear |
| HSV SenatorE SERIES | 2006–2013 | Rear |
| HSV SenatorGEN FSuits models with ball links | 2013–2016 | Rear |
| HSV W427E SERIES | 2008–2013 | Rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front