Whiteline rear sway bar
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit
- Bar diameter20mm3 point adjustable
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar
The Whiteline BIR10Z rear sway bar is designed to perform under extreme conditions, delivering long-lasting, reliable performance, the perfect, complete upgrade. Sway bars are principally designed to reduce body roll, spreading lateral loads more evenly across the tyres for more cornering grip and better outright performance. The gains extend to handling, safety and tyre wear without affecting ride quality or comfort.
Note - Excludes models fitted with airbags
Whiteline BIR10Z
Sway bar settings
Bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 19mm | +100% |
| Medium | Balanced | 20mm | +145% |
| Hard | Maximum roll control | 21mm | +195% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
Whiteline BIR10Z
Specifications
Kit
| Kit type | Rear Sway Bar - 20mm 3 Point Adjustable |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Links, 4 Bushings, 2 Saddles, 2 Brackets, 2 U-Bolts, 4 Bolts, 8 Washers, 4 Nuts |
Sway bar
| Diameter (mm) | 20 |
|---|---|
| Diameter (in) Fraction | 51/64" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | 3 Point Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | BIR10Z |
|---|---|
| EAN | 9319924447602 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BIR10Z
Vehicle fitment
5 vehicles
- 20mm 3 Point Adjustable
- Excludes models fitted with airbags
| Vehicle | Years | Position |
|---|---|---|
| Holden ColoradoRG 2WD20mm 3 Point Adjustable - Suits Hi-Rider models - Excludes models fitted with airbags | 2012–2020 | Rear |
| Holden ColoradoRG 4WD & 2WD Hi-Rider | 2012–2020 | Rear |
| Isuzu D-MAXTFR II 2WD20mm 3 Point Adjustable - Suits Hi-Rider models - Excludes models fitted with airbags | 2012–2020 | Rear |
| Isuzu D-MAXTFS II 4WD | 2012–2020 | Rear |
| LDV T60TK 4WD | 2017–on | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
HOLDEN COLORADO 2012-2020 RG 4WD
Fitment position: Front & Rear
