Whiteline rear sway bar
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit1 sway bar, 4 bushings
- Bar diameter24mm2 point adjustable
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar
The Whiteline BTR94Z rear sway bar is designed to perform under extreme conditions, delivering long-lasting, reliable performance, the perfect, complete upgrade. Sway bars are principally designed to reduce body roll, spreading lateral loads more evenly across the tyres for more cornering grip and better outright performance. Whiteline calls it the best dollar-for-dollar handling improvement you can make to your vehicle.
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3-point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety, and tyre wear without affecting ride quality or comfort.
Note - Suits models without KDSS
Whiteline BTR94Z
Sway bar settings
Bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 23mm | +20% |
| Medium | Balanced | 24mm | +40% |
| Hard | Maximum roll control | 25mm | +65% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
Whiteline BTR94Z
Specifications
Kit
| Kit type | Rear Sway Bar - 24mm 3 Point Adjustable |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 4 Bushings |
Sway bar
| Diameter (mm) | 24 |
|---|---|
| Diameter (in) Fraction | 61/64" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | 2 Point Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | BTR94Z |
|---|---|
| EAN | 9319924447626 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
BTR94Z
Vehicle fitment
7 vehicles
- 24mm 2 Point Adjustable
| Vehicle | Years | Position |
|---|---|---|
| Lexus GXGX460 (J150)Suits models without KDSS or rear E-Locker differential | 2009–2024 | Rear |
| Lexus GXGX470 (J120) | 2001–2009 | Rear |
| Toyota 4 RunnerGRN210/215 4x4 | 2002–2009 | Rear |
| Toyota FJ CruiserGSJ15Suits models without rear E-Locker differential | 2009–2018 | Rear |
| Toyota Hilux Surf_N210-215 | 2002–2009 | Rear |
| Toyota Land Cruiser Prado120 Series | 2002–2010 | Rear |
| Toyota Land Cruiser Prado150 SeriesSuits models without KDSS or rear E-Locker differential | 2009–2024 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
TOYOTA FJ CRUISER 2009-2018 GSJ15
