A complete PRO lift of approximately 25-35mm at the front and 35-40mm at the rear for the Mitsubishi Challenger PB 4WD (2010-2015), built around Bilstein B6 Offroad shocks and pre-assembled ReadyStruts, with front offset upper control arms. It's developed to improve ride quality, handling and control across sealed roads, touring routes and off-road terrain.
The Bilstein B6 Offroad front shocks are paired with King Springs front coils and SuperPro strut mounts, assembled into ReadyStruts and matched to your front load. At the rear, Bilstein B6 Offroad shocks work with King Springs raised rear coil springs. See every part in the What's in the kit tab.
Why Bilstein B6 Offroad shocks
- 46mm monotube, high-pressure gas. Oil and gas sit in separate chambers, so damping stays consistent on corrugations and rough terrain, without the cavitation that affects twin-tube shocks.
- Digressive valving. Reacts instantly to changing surfaces for a stable, controlled and comfortable ride.
- Tuned for your vehicle. Vehicle-specific shock tuning for handling, comfort and durability.
- German engineered. The shocks are precision-engineered in Germany using premium, high-quality materials.
- Built to outlast. Most of the B6 Offroad range is fully serviceable, so it can be professionally serviced to restore performance instead of being replaced.
Front offset upper control arms
The PRO kit adds a pair of front offset upper control arms, from SuperPro or Whiteline depending on stock and your brand preference, to help restore the front alignment at the lifted height. They replace the shortened bump stop used in the standard kit.
Pre-assembled ReadyStruts
Up front, the Bilstein B6 Offroad shocks come pre-assembled with King Springs coil springs and SuperPro strut mounts as a matched pair of ready-to-fit struts. There's no spring-and-strut dismantling before fitting, which helps cut installation time.
Ride, handling and load
- Matched to your load. The springs create the lift, so choose your front load (bull bar and winch) when you build your kit. Getting this right gives a level stance and a comfortable ride, and stops the rear sagging.
- Accessories first. Where possible, fit permanent accessories like bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly from the start.
- Professional fitting. We recommend installation by a suspension technician or mechanic with wheel alignment facilities.
Who it suits
Challenger owners who want a comfortable, heavy-duty setup for daily driving, touring and recreational off-road use. Check your vehicle in the Vehicle Fitment tab before you order.
What's in the kit
Every part in this kit, matched to your choices
Some parts are out of stock. This may delay dispatch.
-
Preassembled Ready Struts× 2
Each includes
- Front Shocks
- Front Strut Mounts
- Front Springs× 2Matches Front Load
-
Rear Shock Absorbers× 2
-
Raised Rear Springs× 2Matches Rear Load
Choose Rear Load above to see which one is included
Bilstein lift kit warranty
3 year / 60,000kmBilstein lift kits are covered by a 3 year / 60,000km warranty. The standard warranty conditions below apply.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Improper installation
- Abuse, or damage due to collision or neglect
- Modified or altered from the original design
- Corrosion or accelerated wear
- Used for an application it wasn't designed or advertised for
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
Fits these vehicles
1 vehicle
- Series / chassis
- PB
- Years
- 2008-2016
- Drive
- –
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Fitment notes
-
Approx. 25-40mm liftAbout 25-35mm at the front and 35-40mm at the rear. Final height depends on your permanent accessories, constant load and intended use.
-
Match springs to your loadFront coils are matched to your bar/winch weight.
-
Fit accessories firstWhere possible, fit bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly.
-
Professional fitting recommendedWe recommend installation by a suspension technician or mechanic, preferably with wheel alignment facilities.
-
Wheel alignment requiredHave a wheel alignment done after fitting. We recommend a suspension technician or mechanic with alignment facilities.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
MITSUBISHI CHALLENGER 2008-2016 - PB
