Whiteline front lower control arm, offset bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline KCA317X front lower control arm offset bush kit is designed to maximise tyre contact with the road, improving cornering and grip, the perfect, complete upgrade. Whiteline anti lift kits are primarily designed to improve traction and cornering grip under power. The extra caster and firmer bushings dramatically sharpen initial turn-in response.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serves to dramatically sharpen the initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Note - Performance Alignment - adds +0.5deg caster + anti-lift
Application
- HYUNDAI LANTRA 1991-1992 - LANTRA J1 1.6L
- MITSUBISHI FTO 1994-2001 - DE
- MITSUBISHI LANCER 1988-1992 - CA, CB
- MITSUBISHI LANCER 1992-1996 - CC Wagon and Hatch
- MITSUBISHI LANCER 1992-1996 - CC and Coupe
- MITSUBISHI LANCER 1995-2004 - CE , Coupe and Hatch
- MITSUBISHI LANCER 1996-2003 - CE Wagon
- MITSUBISHI LANCER 2002-2008 - CG, CH, CS
- MITSUBISHI MIRAGE 1995-2004 - CE - CP
- PROTON IMPIAN - WAJA 2001-2006 - IMPIAN-WAJA CF
- PROTON JUMBUCK 2002-2010 - JUMBUCK UTE
- PROTON M21 1995-2000 - M21 C99
- PROTON PERSONA 1996-2004 - PERSONA C96, C97
- PROTON SATRIA 1997-2007 - SATRIA C97, C98
- PROTON WIRA 1995-2002 - WIRA C97, C98
Whiteline KCA317X
Alignment
- Alignment affectedCaster / Anti-Lift
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline KCA317X
Specifications
Kit
| Kit type | Front Lower Control Arm - Offset Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Bush dimensions
| OD (A) | AI=64 AII=62 mm |
|---|---|
| ID (B) | 20.6 mm |
| Length (C) | 52 mm |
Bush dimensions
| OD (A) | AI=64 AII=62 mm |
|---|---|
| ID (B) | 20.6 mm |
| Length (C) | 52 mm |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KCA317X |
|---|---|
| EAN | 9319924342402 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KCA317X
Vehicle fitment
18 vehicles
- Performance Alignment
- Adds +0.5deg caster + anti-lift
| Vehicle | Years | Position |
|---|---|---|
| Hyundai LantraJ1 GL SedanPerformance Alignment - Suits 1.6L models - 60mm OD - adds +0.5deg caster + anti-lift | 1990–1995 | Front |
| Mitsubishi FTODEPerformance Alignment - Square bushing design - Adds +0.5deg caster + anti-lift | 1994–2001 | Front |
| Mitsubishi LancerCC GSR | 1992–1996 | Front |
| Mitsubishi LancerCC Sedan and Coupe | 1992–1996 | Front |
| Mitsubishi LancerCC Wagon and Hatch | 1992–1996 | Front |
| Mitsubishi LancerCE Sedan, Coupe and Hatch | 1995–2004 | Front |
| Mitsubishi LancerCE Wagon | 1996–2003 | Front |
| Mitsubishi LancerCG, CH, CSPerformance Alignment - Square bushing design - Adds +0.5deg caster + anti-lift | 2002–2008 | Front |
| Mitsubishi MirageCE - CP | 1995–2004 | Front |
| Proton Impian - WajaSedan | 2001–2007 | Front |
| Proton JumbuckUte | 2002–2008 | Front |
| Proton M21Sedan & Coupe | 1995–2000 | Front |
| Proton PersonaC9_M | 1996–2005 | Front |
| Proton PersonaC9_S | 1994–2003 | Front |
| Proton SatriaC9_M | 1996–2005 | Front |
| Proton WiraC9_C, C9_S | 1995–2000 | Front |
| Proton WiraWira | 2000–2002 | Front |
| Volvo V40VW | 1997–2004 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Fitment position: Front
Fitment position: Front
Fitment position: Front
