Measurements (mm)× 2in kit
- Outer diameterOD40 mm
- Inner diameterID15.6 mm
- Length48.8 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD43 mm
Whiteline front lower control arm, offset bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this part
The Whiteline KCA325 front lower control arm offset bush kit is designed to deliver a balanced mix of comfort, precision, and durability, the perfect, complete upgrade. Whiteline anti lift kits are primarily designed to improve traction and cornering grip under power. The extra caster and firmer bushings dramatically sharpen initial turn-in response.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serves to dramatically sharpen the initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Note - Performance Alignment - adds +0.5deg caster + anti-lift
Whiteline KCA325
Alignment
- Alignment affectedCaster / Anti-Lift
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline KCA325
Specifications
Kit
| Kit type | Front Lower Control Arm - Offset Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Saddles, 2 Plates, 4 Bolts, 8 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KCA325 |
|---|---|
| EAN | 9319924342426 |
Whiteline KCA325
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: KCA325 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KCA325
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg caster + anti-lift
| Vehicle | Years | Position |
|---|---|---|
| Toyota PaseoEL44-54 | 1991–1999 | Front |
| Toyota StarletEP82-85 | 1989–1996 | Front |
| Toyota StarletEP91 | 1996–1999 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
