Measurements (mm)× 4in kit
- Outer diameterOD34.4 mm
- Inner diameterID21.6 mm
- Length38.4 mm
- Flange thicknessFL11 mm
- Flange outer diameterFLOD43 mm
Centre tubeOD × ID × length, mm22.2x10.2x40 Offset Knurled× 4
Whiteline upper control arm
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit4 bushings, 4 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this upper control arm
The Whiteline KCA378 upper control arm camber kit lets you fine-tune camber for better tyre contact, improving handling and tyre life. Its dual offset synthetic elastomer bushings help hold the preferred alignment settings while sharpening steering response.
Note - Performance Alignment - adds +/- 1.0deg camber
Whiteline KCA378
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
Whiteline KCA378
Specifications
Kit
| Kit type | Rear Upper Control Arm - Camber Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 4 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KCA378 |
|---|---|
| EAN | 9319924342822 |
Diagram
Whiteline KCA378
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyArm and bushes: lifetime. Ball joint: 3 year / 60,000km.This Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Arm and bushes: lifetime. Ball joint: 3 year / 60,000km.
This product: KCA378 is protected by a lifetime warranty (ball joint: 3 year / 60,000km)
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KCA378
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 1.0deg camber
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic4th Gen EC, ED, EE | 1987–1993 | Front |
| Honda Civic5th Gen EG, EH | 1991–1995 | Front |
| Honda IntegraDC2 & DC4 Vti-R / Type R | 1993–2001 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
