Measurements (mm)× 4in kit
- Outer diameterOD36 mm
- Inner diameterID26 mm
- Length16 mm
- Flange thicknessFL3.3 mm
- Flange outer diameterFLOD40 mm
Centre tubeOD × ID × length, mm27 × 12.2 × 31.5× 2
Whiteline rear upper camber kit
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this upper camber kit
The Whiteline KCA379 rear upper camber kit is designed to ensure long-lasting durability, no matter the purpose, the perfect, complete upgrade. Whiteline fixed camber kits provide additional camber angle for increased grip during cornering and traction under power. Low compliance synthetic elastomer bushings maintain preferred alignment settings and enhance steering response.
Note - Performance Alignment - adds +/- 1.5deg camber
Whiteline KCA379
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
Whiteline KCA379
Specifications
Kit
| Kit type | Rear Upper Camber Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KCA379 |
|---|---|
| EAN | 9319924342839 |
Whiteline KCA379
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: KCA379 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KCA379
Vehicle fitment
1 vehicle
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 1.5deg camber
| Vehicle | Years | Position |
|---|---|---|
| Mazda RX-7Series 4, 5 FC | 1985–1989 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
