- Outer diameterOD65.1 mm
- Inner diameterID32 mm
- Length84.5 mm
- Flange thicknessFL6 mm
- Flange outer diameterFLOD85 mm
Whiteline front lower control arm, offset bush kit + anti lift
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit2 housings, 2 bushings
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline KCA465 front lower control arm offset bush kit + anti lift is designed to greatly increase control and confidence, the perfect, complete upgrade. Whiteline anti lift kits are primarily designed to improve traction and cornering grip under power. Special low compliance bushings reduce caster wind-back and keep static and dynamic alignment settings closer together.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serves to dramatically sharpen the initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Note - Performance Alignment - adds +0.75deg caster + anti-lift - includes housing
Application
- FORD FOCUS 2011-2018 - FOCUS LW, LZ
- FORD FOCUS 2012-2018 - LW, LZ ST
- FORD FOCUS 2015-2018 - LZ RS
- FORD KUGA 2011-2016 - KUGA TE, TF
Whiteline KCA465
Alignment
- Alignment affectedCaster / Anti-Lift
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline KCA465
Specifications
Kit
| Kit type | Front Lower Control Arm - Offset Bush Kit + Anti Lift |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Housings, 2 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KCA465 |
|---|---|
| EAN | 9319924460083 |
Whiteline KCA465
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
- Outer diameterOD30.5 mm
- Inner diameterID21.5 mm
- Length64 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD50 mm
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KCA465
Vehicle fitment
6 vehicles- Performance Alignment
- Adds +0.75deg caster + anti-lift
- Includes housing
| Vehicle | Years | Position |
|---|---|---|
| Ford FocusLW, LZ | 2011–2018 | Front |
| Ford FocusLW, LZ ST | 2012–2018 | Front |
| Ford FocusLZ RS | 2015–2018 | Front |
| Ford KugaTE, TFPerformance Alignment - Suits TF models - Adds +0.75deg caster + anti-lift - includes housing | 2011–2016 | Front |
| Mazda 3BL | 2009–2013 | Front |
| Mazda 3BL MPS | 2009–2013 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.









