Measurements (mm)× 2in kit
- Outer diameterOD52.6 mm
- Inner diameterID22 mm
- Length51.65 mm
- Flange outer diameterFLOD8.15 mm
Centre tubeOD × ID × length, mm22.2 × 12.2 × 52× 2
Whiteline rear beam axle bush kit
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this beam axle bush kit
The Whiteline KDT945 rear beam axle bush kit is designed to balance comfort with performance while minimising noise and vibrations, the perfect, complete upgrade. It reduces rear end cornering squirm and improves braking efficiency. Whiteline calls it a critical rear end bushing for any front wheel drive vehicle, as it absorbs all the cornering and braking energy.
A critical rear-end bushing for any front-wheel drive vehicle as it absorbs all the cornering and braking energy. Over-compliance leads to early wear and tear, especially in performance applications. Reduce rear-end cornering squirm and improve braking efficiencies with the Whiteline beam axle kit.
Application
- ABARTH 500 / 595 / 695 2008-ON - 500 / 595 312
- ABARTH 500C / 595C / 695C 2008-ON - 500C / 595C 312
- FIAT 500 2007-ON - 500 312
- FIAT 500 C 2007-ON - 500C 312
- FIAT PANDA 2012-ON - PANDA 312, 319
Whiteline KDT945
Specifications
Kit
| Kit type | Rear Beam Axle Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KDT945 |
|---|---|
| EAN | 9319924406104 |
Whiteline KDT945
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: KDT945 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KDT945
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Abarth 500 / 595 / 695312 | 2008–on | Rear |
| Abarth 500C / 595C / 695C312 | 2007–on | Rear |
| Fiat 500312 | 2007–on | Rear |
| Fiat 500 C312 | 2007–on | Rear |
| Fiat Panda312, 319, 519 | 2012–on | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
