Measurements (mm)× 2in kit
- Outer diameterOD65.4 mm
- Inner diameterID22.2 mm
- Length89 mm
- Flange thicknessFL13.1 mm
- Flange outer diameterFLOD75.5 mm
Centre tubeOD × ID × length, mm22.2 × × 12.2 × 90× 2
Whiteline rear beam bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this beam bush kit
The Whiteline KDT948 rear beam bush kit is designed to create a consistent drive no matter the surface, the perfect, complete upgrade. Whiteline calls it a critical rear end bushing for any front wheel drive vehicle, as it absorbs all the cornering and braking energy. It reduces rear end cornering squirm and improves braking efficiency.
A critical rear-end bushing for any front-wheel drive vehicle as it absorbs all the cornering and braking energy. Over-compliance leads to early wear and tear, especially in performance applications. Reduce rear-end cornering squirm and improve braking efficiencies with the Whiteline beam axle kit.
Application
- NISSAN MICRA 2002-2010 - MICRA K12
- NISSAN NOTE 2006-2012 - NOTE E11
- NISSAN TIIDA 2006-2013 - TIIDA C11
- RENAULT CLIO 2006-2013 - CLIO SERIES III X85 SPORT
Whiteline KDT948
Specifications
Kit
| Kit type | Rear Beam Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KDT948 |
|---|---|
| EAN | 9319924406777 |
Whiteline KDT948
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: KDT948 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KDT948
Vehicle fitment
7 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- 1 Piece bushing design
| Vehicle | Years | Position |
|---|---|---|
| Nissan MicraK12 | 2002–2010 | Rear |
| Nissan NoteE11 | 2006–2012 | Rear |
| Nissan TiidaC11 | 2007–2012 | Rear |
| Renault ClioBB, CB Series II | 1998–2016 | Rear |
| Renault ClioBR, CR Series III (Excl Sport) | 2005–2014 | Rear |
| Renault ClioBR, CR SPORT Series III | 2006–2014 | Rear |
| Renault Modus / Grand ModusSeries I | 2004–2012 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
