Whiteline 2.5" lowering block kit
Key specs
- PositionRear axle
- Install time1 hour
- Supplied as1 kit2 blocks, 4 u-bolts, 4 washers, 4 nuts
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this 2.5" lowering block kit
The Whiteline KLB109-25 rear lowering block kit is an economical and quick way to lower many leaf-sprung vehicles. These aluminium blocks allow the vehicle's height to be modified, transforming its handling and looks.
Whiteline aluminum lowering blocks are the economical and quick way to lower many leaf-sprung vehicles. Lowering blocks allow the vehicle's height to be modified, transforming the handling and looks of your vehicle.
Note - Suits models with 85mm wide U bolt
Application
- HOLDEN RODEO 1978-1988 - RODEO KB4# /KBD4# 4WD
- HOLDEN RODEO 1978-1988 - RODEO KB2#, KBD2# 2WD
- HOLDEN RODEO 1988-2003 - TFS 4WD
- HOLDEN RODEO 1988-2003 - TFS 2WD
- NISSAN DATSUN 1986-1997 - D21 2WD
- NISSAN NAVARA 1986-1997 - D21 2WD
- NISSAN NAVARA 1997-2015 - NAVARA D22 2WD
Whiteline KLB109-25
Specifications
Kit
| Kit type | 2.5" Lowering Block Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Blocks, 4 U-Bolts, 4 Washers, 4 Nuts |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | KLB109-25 |
|---|---|
| EAN | 9319924403998 |
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KLB109-25
Vehicle fitment
10 vehicles
- 63mm (2.5")
- Suits models with 85mm wide U bolt
| Vehicle | Years | Position |
|---|---|---|
| Bedford KBMK2 2WD | 1972–1988 | Rear |
| Bedford KBMK2 4WD | 1972–1988 | Rear |
| Holden RodeoKB2, KBD2 2WD | 1981–1988 | Rear |
| Holden RodeoKB4, KBD4 4WD63mm (2.5") | 1981–1988 | Rear |
| Holden RodeoTFR 2WD63mm (2.5") | 1988–2003 | Rear |
| Holden RodeoTFS 4WD63mm (2.5") | 1988–2003 | Rear |
| Nissan NavaraD21 2WD | 1985–1999 | Rear |
| Nissan NavaraD22 2WD | 1997–2015 | Rear |
| Nissan Pick UPD21 | 1985–1999 | Rear |
| Nissan Pick UPD22 | 1997–2014 | Rear |
No vehicles match.
Lowering Block - Kit 2.5". Block = 63mm, Pin = 13mm, Hole = 16mm Tapered, U Bolt = M14x85mm
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
