Whiteline front swaybar link kit
Key specs
- PositionFront axle
- Install time1 hour
- Supplied as1 kit2 links, 4 bolts, 8 washers, 4 nuts
- Link length65mm8mm/10mm bolt diameter
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this swaybar link kit
The Whiteline KLC30 front sway bar link kit is designed to perform under extreme conditions, delivering long-lasting, reliable performance, the perfect, complete upgrade. It pairs a high tensile extruded alloy link with ultra low compliance synthetic elastomer bushings. The result is much more precise and direct roll control.
The kit utilizes a high tensile extruded alloy link fitted with ultra-low compliance synthetic elastomer bushings. Critical hardware is replaced with high-tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.
Note - Extra heavy-duty alloy - suits models with steel arm 10/1992 - on
Whiteline KLC30
Specifications
Kit
| Kit type | Front Swaybar Link Kit (Steel Arm) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Links, 4 Bolts, 8 Washers, 4 Nuts |
Link
| Link Type | Bushing |
|---|---|
| Adjustable | Fixed |
| On Car Adjustable | Not Applicable |
| Adjustment | Not Applicable |
| Bolt Diameter | 8mm/10mm |
| Overall Length | 65mm |
| Configuration | Horizontal |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | KLC30 |
|---|---|
| EAN | 9319924338429 |
Whiteline warranty
3 year / 60,000kmWhiteline ball joints, tie rod ends, bearings, links and springs are covered by a 3 year / 60,000km warranty against manufacturing defects. The warranty covers replacement of the original component only.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KLC30
Vehicle fitment
12 vehicles
- Extra heavy duty alloy
| Vehicle | Years | Position |
|---|---|---|
| Subaru ForesterSF | 1997–2002 | Front |
| Subaru ImprezaGC, GF Sedan and WagonSuits models with steel arm | 1992–2000 | Front |
| Subaru ImprezaGG Wagon | 2000–2007 | Front |
| Subaru ImprezaWRX GC, GF Sedan & WagonSuits models with steel arm | 1992–2000 | Front |
| Subaru ImprezaWRX GG Wagon | 2000–2008 | Front |
| Subaru LegacyBD, BG, BK | 1994–1999 | Front |
| Subaru LegacyBE, BHSuits wagon | 1998–2003 | Front |
| Subaru LibertyBC, BJ, BFSuits models 10/1992 - on | 1989–1994 | Front |
| Subaru LibertyBD, BG, BK | 1994–1999 | Front |
| Subaru LibertyBE, BH, BTSuits wagon | 1998–2003 | Front |
| Subaru OutbackBG | 1996–1998 | Front |
| Subaru OutbackBH | 1998–2003 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
