Whiteline front swaybar link kit
Key specs
- PositionFront axle
- Install time1 hour
- Supplied as1 kit2 links, 4 spacers, 4 bolts, 12 washers, 4 nuts
- Link length65mm10mm bolt diameter
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this swaybar link kit
The Whiteline KLC32 front sway bar link kit is designed to perform under extreme conditions, delivering long-lasting, reliable performance, the perfect, complete upgrade. It pairs a high tensile extruded alloy link with ultra low compliance synthetic elastomer bushings. The result is much more precise and direct roll control.
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.
Suits OEM say bar models to - MY04 and replaces OEM ball link for models MY05 On
Application
- SUBARU FORESTER 2002-2008 - SG
- SUBARU IMPREZA 1992-2000 - WRX GC, GF and Wagon
- SUBARU IMPREZA 1992-2000 - GC, GF and Wagon
- SUBARU IMPREZA 1992-2000 - WRX STi GC, GF and Wagon
- SUBARU IMPREZA 2000-2005 - GD
- SUBARU IMPREZA 2000-2005 - WRX GD
- SUBARU IMPREZA 2001-2005 - WRX STi GD
- SUBARU IMPREZA 2007-2011 - GE, GH
- SUBARU IMPREZA 2008-2011 - WRX STi GR Hatch
- SUBARU IMPREZA 2011-2014 - WRX STi GV, GR
- SUBARU IMPREZA 2011-2016 - GJ, GP
- SUBARU LIBERTY 1998-2003 - BE, BH, BT
- SUBARU LIBERTY 2003-2009 - BL, BP
- SUBARU OUTBACK 2003-2009 - BP
- SUBARU XV 2011-2017 - GP
- SUBARU XV 2017-2023 - GT
Whiteline KLC32
Specifications
Kit
| Kit type | Front Swaybar Link Kit (Alloy Arm To MY04) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Links, 4 Spacers, 4 Bolts, 12 Washers, 4 Nuts |
Link
| Link Type | Bushing |
|---|---|
| Adjustable | Fixed |
| On Car Adjustable | Not Applicable |
| Adjustment | Not Applicable |
| Bolt Diameter | 10mm |
| Overall Length | 65mm |
| Configuration | Horizontal |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | KLC32 |
|---|---|
| EAN | 9319924358700 |
Whiteline warranty
3 year / 60,000kmWhiteline ball joints, tie rod ends, bearings, links and springs are covered by a 3 year / 60,000km warranty against manufacturing defects. The warranty covers replacement of the original component only.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KLC32
Vehicle fitment
18 vehicles
- Extra heavy duty alloy
- Replaces OEM ball joint link
- Suits OEM sway bar
| Vehicle | Years | Position |
|---|---|---|
| Subaru ForesterSG | 2002–2008 | Front |
| Subaru ImprezaGC, GF Sedan and WagonExtra heavy duty alloy - Suits models with alloy arm and OEM sway bar | 1992–2000 | Front |
| Subaru ImprezaGD SedanExtra heavy duty alloy - Suits OEM sway bar | 2000–2007 | Front |
| Subaru ImprezaGE, GH Sedan & Hatch | 2007–2011 | Front |
| Subaru ImprezaGJ, GP Sedan and Hatch | 2011–2016 | Front |
| Subaru ImprezaWRX GC, GF Sedan & WagonExtra heavy duty alloy - Suits models with alloy arm and OEM sway bar | 1992–2000 | Front |
| Subaru ImprezaWRX GD SedanExtra heavy duty alloy - Suits OEM sway bar | 2000–2008 | Front |
| Subaru ImprezaWRX STi GC, GF Sedan & WagonExtra heavy duty alloy - Suits OEM sway bar | 1992–2000 | Front |
| Subaru ImprezaWRX STi GD SedanSuits OEM say bar models to - MY04 and replaces OEM ball link for models MY05 | 2001–2005 | Front |
| Subaru ImprezaWRX STi GD SedanReplaces OEM ball link | 2005–2007 | Front |
| Subaru ImprezaWRX STi GR Hatch | 2008–2011 | Front |
| Subaru ImprezaWRX STi GV, GR Sedan and Hatch | 2011–2014 | Front |
| Subaru LegacyBE, BH | 1998–2003 | Front |
| Subaru LegacyBL, BP | 2003–2009 | Front |
| Subaru LibertyBE, BH, BT | 1998–2003 | Front |
| Subaru LibertyBL, BP | 2003–2009 | Front |
| Subaru OutbackBP | 2003–2008 | Front |
| Subaru XVGP | 2012–2017 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
