Whiteline front upper control arm
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kitA pair
- CorrectsCamber / CasterFixed adjustment
- Ball joint included
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper control arm
The Whiteline KTA254 front upper control arm (offset) is designed to maximise tyre contact with the road, improving cornering and grip, the perfect, complete upgrade. It is an all-in-one solution for lifted vehicles, with greater clearance to the coil over strut and more arm articulation.
A shortfall of the modern-day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at the ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Note - Performance - fixed offset alignment correction arms
Application
- MITSUBISHI CHALLENGER 2008-2015 - PB, PC
- MITSUBISHI PAJERO SPORT 2015-on - QE
- MITSUBISHI TRITON 2006-2015 - ML, MN 4WD
- MITSUBISHI TRITON 2015-on - MQ, MR 4WD suits models with KB4 within Vin #
Whiteline KTA254
Specifications
Kit
| Kit type | Front Upper Control Arm (Offset) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Arms |
| Arm Type | Alignment |
| Units | Pair |
| Ball Joint Included | Yes |
| Adjustable (Arms) | No |
Alignment correction
| Alignment Type | Camber / Caster |
|---|---|
| Adjustment Type | Fixed |
| On Car Adjustable | No |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KTA254 |
|---|---|
| EAN | 9319924469017 |
Whiteline warranty
Lifetime warrantyArm and bushes: lifetime. Ball joint: 3 year / 60,000km.This Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Arm and bushes: lifetime. Ball joint: 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KTA254
Vehicle fitment
5 vehicles
- Fixed offset alignment correction arms
- Includes ball joint
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi ChallengerPB, PC | 2008–2015 | Front |
| Mitsubishi L200ML, MN | 2006–2015 | Front |
| Mitsubishi TritonML, MN 4WD | 2006–2015 | Front |
| Mitsubishi TritonMQ 4WDFixed offset alignment correction arms - Suits models with KB4 within Vin # - Includes ball joint | 2015–2018 | Front |
| Mitsubishi TritonMR 4WDFixed offset alignment correction arms - Suits models with KB4 within Vin # - Includes ball joint | 2018–2024 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
