PAJERO SPORT - FORMULA V2 50MM PRO LIFT KIT

A complete 50mm PRO lift for the Mitsubishi Pajero Sport QE and QF (2015-2024), built around Formula 4x4 shocks and pre-assembled, height-adjustable ReadyStruts, with front offset upper control arms. It's developed to improve ride quality, handling and control across sealed roads, touring routes and off-road terrain.

The height-adjustable Formula 4x4 front struts are paired with King Springs front coils and SuperPro strut mounts, assembled into ReadyStruts and matched to your front load. At the rear, Formula 4x4 shocks work with King Springs raised rear coil springs matched to your rear load. See every part in the What's in the kit tab.

Height-adjustable front struts

The front struts have three spring seat settings. The default is the lowest, and each step up raises the front by about 10-15mm.

If your accessory load changes after fitting, for example if you add a bull bar or winch later, the extra weight can pull the front below its lifted height. The spring seat lets the front ride height be trimmed back to suit.

Adjusting the height is a workshop job. The strut has to be removed and the front end disassembled, so have it done by a suspension professional, followed by a wheel alignment.

Why Formula 4x4 shocks

• Fade-free damping. Low-pressure nitrogen gas for fade-free performance, with a design that aids heat dissipation.
• SuperPro bushings. Fitted to all front struts, with tapered pegs for extra strength.
• Made for your vehicle. An application-specific design, with valve coding to suit differing spring rates, designed and built for Australian conditions.

Front offset upper control arms

The PRO kit adds a pair of front offset upper control arms to help restore the front alignment at the lifted height. The arms differ between the QE and QF, so you choose your model when you build your kit. QE models get SuperPro or Whiteline arms depending on stock and your brand preference, and QF models get SuperPro arms. They replace the shortened bump stop used in the standard kit.

Pre-assembled ReadyStruts

Up front, the height-adjustable Formula 4x4 struts come pre-assembled with King Springs coil springs and SuperPro strut mounts as a matched pair of ready-to-fit struts. There's no spring-and-strut dismantling before fitting, which helps cut installation time.

Ride, handling and load

• Matched to your load. The springs create the lift, so choose your front load (bull bar and winch) and rear load when you build your kit. Getting this right gives a level stance and a comfortable ride, and stops the rear sagging.
• Accessories first. Where possible, fit permanent accessories like bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly from the start.
• Professional fitting. We recommend installation by a suspension technician or mechanic with wheel alignment facilities.

Who it suits

Pajero Sport owners who want a comfortable, heavy-duty setup for daily driving, touring and recreational off-road use, with the option to trim the front ride height if their accessory load changes later. Check your vehicle in the Vehicle Fitment tab before you order.