A complete 50mm lift for the Nissan Patrol GU (Y61) wagon, 1997-2016, built around Bilstein B6 Offroad shocks and King Springs coils front and rear. It's set up to improve ride quality, handling and control on sealed roads, touring routes and off-road.
The Bilstein dampers are paired with raised King Springs coils matched to your front and rear load, plus a caster correction bush kit, a leading arm to chassis bush kit and a steering damper matched to your build date. See every part in the What's in the kit tab.
The B6 Offroad is balanced for dual-purpose use: comfortable on the daily drive, with the strength and responsiveness to handle rough tracks.
Why Bilstein B6 Offroad shocks
- 46mm monotube, high-pressure gas. Oil and gas sit in separate chambers, so damping stays consistent on corrugations and rough terrain, without the cavitation that affects twin-tube shocks.
- Digressive valving. Reacts instantly to changing surfaces for a stable, controlled and comfortable ride.
- Tuned for your vehicle. Vehicle-specific shock tuning for handling, comfort and durability.
- German engineered. The shocks are precision-engineered in Germany using premium, high-quality materials.
- Built to outlast. Most of the B6 Offroad range is fully serviceable, so it can be professionally serviced to restore performance instead of being replaced.
Caster correction included
The offset caster bush kit adds about 2 degrees of caster correction after the lift, restoring steering feel and control and helping prevent the tyre wear issues that come from lifting your 4WD.
Bush kits and steering damper
- Leading arm to chassis bush kit.
- Steering damper to suit your build date: pin/pin mount up to 02/2000, eye/eye mount from 03/2000.
The bush kits are supplied in SuperPro or Whiteline, and you can choose a brand preference when you build your kit. A wheel alignment is needed after fitting.
Ride, handling and load
The B6 Offroad's damping is designed for reduced body roll, sharper handling and better traction, with consistent control and effective heat management whether you're on a gravel road, towing a trailer or taking the family out.
- Matched to your load. The springs create the lift, so choose your front load (bull bar and winch), engine and rear load when you build your kit. Getting this right gives a level stance and a comfortable ride, and stops the rear sagging.
- Accessories first. Where possible, fit permanent accessories like bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly from the start.
- Professional fitting. We recommend installation by a suspension technician or mechanic, preferably with wheel alignment facilities.
Recommended upgrades (not included)
These parts aren't part of this kit and don't change its price. We recommend them for a GU Patrol, and they're sold separately:
- SuperPro TRC1215 performance leading arm kit (replaces the caster and leading arm bush kits)
- SuperPro TRC9022 billet swaybar mount saddle kit
- BOSS4PCB rear spring chassis brace kit
Who it suits
GU Patrol owners who want one setup that does it all: daily driving, touring, towing and off-road. Check your vehicle in the Vehicle Fitment tab before you order.
What's in the kit
Every part in this kit, matched to your choices
Some parts are out of stock. This may delay dispatch.
-
Front Shock Absorbers× 2
-
Front Springs× 2Matches Front Load
Choose Front Load above to see which one is included
-
Rear Shock Absorbers× 2
-
Rear Springs× 2Matches Rear Load
Choose Rear Load above to see which one is included
Bilstein lift kit warranty
3 year / 60,000kmBilstein lift kits are covered by a 3 year / 60,000km warranty. The standard warranty conditions below apply.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Improper installation
- Abuse, or damage due to collision or neglect
- Modified or altered from the original design
- Corrosion or accelerated wear
- Used for an application it wasn't designed or advertised for
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
Fits these vehicles
1 vehicle
- Series / chassis
- GU Y61 Wagon
- Years
- 1997-2016
- Drive
- 4WD
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Fitment notes
-
Approx. 50mm liftFinal front and rear height depends on your permanent accessories, constant load and intended use.
-
Match springs to your loadChoose Front Load, Engine Type and Rear Load when you build your kit, for a level stance and no rear sag.
-
Recommended upgrades (not included)SuperPro TRC1215 performance leading arm kit (replaces the caster and leading arm bush kits), SuperPro TRC9022 billet swaybar mount saddle kit, and BOSS4PCB rear spring chassis brace kit. Sold separately.
-
Fit accessories firstWhere possible, fit bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly.
-
Professional fitting recommendedWe recommend installation by a suspension technician or mechanic, preferably with wheel alignment facilities.
-
Wheel alignment requiredHave a wheel alignment done after fitting. We recommend a suspension technician or mechanic with alignment facilities.
Questions about fitment? Call 1800 292 911 before you order.










