Measurements (mm)× 8in kit
- Outer diameterOD31.9 mm
- Inner diameterID17 mm
- Length40 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD41 mm
SuperPro rear spring rear eye & shackle bush kit
Key specs
- PositionRear axle
- Install time2 hours
- Supplied as1 kit8 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this spring rear eye & shackle bush kit
The SuperPro SPF5962K rear leaf spring rear eye and shackle bush kit is a polyurethane bush kit that replaces the worn rubber rear eye and shackle bushes in the leaf springs. Firm bushes stop the axle shifting and steering the vehicle from the rear, which causes wandering and instability under heavy braking, especially when loaded or towing. The kit suits original springs with a crush tube in the rear eye.
SuperPro SPF5962K
Specifications
Kit
| Kit type | Rear Spring Rear Eye & Shackle Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF5962K |
|---|---|
| EAN | 9317745078647 |
SuperPro SPF5962K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF5962K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF5962K
Vehicle fitment
2 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Suits OEM bushing with crush tube in rear eye
| Vehicle | Years | Position |
|---|---|---|
| KIA TasmanTK 4WD | 2025–on | Rear |
| KIA TasmanTK RWD | 2025–on | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
