Measurements (mm)× 4in kit
- Outer diameterODAI48.5mmAII47.7mm
- Inner diameterID19 mm
- Length61.5 mm
- Flange thicknessFLDI6mmDII4mm
- Flange outer diameterFLODEI51mmEII38mm
Centre tubeOD × ID × length, mm19 × 13.2 × 61× 4
Whiteline rear trailing arm upper bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit4 shell bushings, 4 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this trailing arm upper bush kit
The Whiteline W61203 rear trailing arm upper bush kit is designed to enhance steering response, delivering sharper handling and more predictable vehicle dynamics, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory, and outright durability that offer a safer more predictable vehicle.
Whiteline W61203
Specifications
Kit
| Kit type | Rear Trailing Arm Upper Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Shell Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W61203 |
|---|---|
| EAN | 9319924353705 |
Whiteline W61203
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W61203 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W61203
Vehicle fitment
10 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Standard replacement
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Rear |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Rear |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Rear |
| Holden MonaroHQ, HJ | 1971–1976 | Rear |
| Holden MonaroHX, HZ | 1976–1980 | Rear |
| Holden StatesmanHQ, HJ | 1971–1976 | Rear |
| Holden StatesmanHX, HZ | 1976–1980 | Rear |
| Holden StatesmanWB | 1980–1985 | Rear |
| Holden ToranaLC, LJ, TA | 1969–1974 | Rear |
| Holden ToranaLH, LX, UC | 1974–1980 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
