SuperPro rear sway bar
Key specs
- PositionRear axle
- Install time1 hour
- Supplied as1 kit1 sway bar, 2 bushings
- Bar diameter24mm3 point adjustable
- Designed in Australia
- Solid spring steel
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar
The SuperPro RC0037RZ-24 rear sway bar is designed to maximise cornering traction and stability, a complete, premium upgrade. SuperPro designed the range to give daily, track and hobbyist cars better driving characteristics. It delivers greater tyre grip in all driving situations. It is designed to maintain maximum tyre contact with the road at all times.
Application
| SUBARU | IMPREZA | 2001-2005 WRX STi GD Sedan |
| SUBARU | IMPREZA | 2005-2007 WRX STi GD Sedan |
Note - to suit vehicles from 10/2003 - 09/2007
SuperPro's sway bar range has been designed to provide daily, track, and hobbyist cars with better driving characteristics, increasing your vehicle's driving performance.
- Lifetime Warranty
- Greater Tyre Grip in all driving situations
- Better handling, sharper steering, and less body roll
- Race-spec Chromoly with progressive design
- 30% Lighter lower unsprung weight
SuperPro RC0037RZ-24
Sway bar settings
Bar settings
| Setting | Use | Acts as | vs OE |
|---|---|---|---|
| Soft | Comfort / low grip | 23mm | +75% |
| Medium | Balanced | 24mm | +105% |
| Hard | Maximum roll control | 25mm | +145% |
Acts as: the effective bar diameter at that setting. vs OE: approximate stiffness against the original bar.
SuperPro RC0037RZ-24
Specifications
Kit
| Kit type | Rear Sway Bar - 24mm 3 Point Adjustable (MY03 On) |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Bushings |
Sway bar
| Diameter (mm) | 24 |
|---|---|
| Diameter (in) Fraction | 61/64" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | 3 Point Adjustable |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | RC0037RZ-24 |
|---|---|
| EAN | 9317745763994 |
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
RC0037RZ-24
Vehicle fitment
2 vehicles
- 24mm 3 Point Adjustable
- Suits models 10/2003
- on with OEM Ball Joint Link
| Vehicle | Years | Position |
|---|---|---|
| Subaru ImprezaWRX STi GD Sedan | 2001–2005 | Rear |
| Subaru ImprezaWRX STi GD Sedan24mm 3 Point Adjustable - Suits models with OEM Ball Joint Link | 2005–2007 | Rear |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front