SuperPro front 27mm sway bar
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit1 sway bar, 2 bushings, 2 brackets
- Bar diameter27mmNon adjustable
- Designed in Australia
- Solid spring steel
- A wheel alignment is needed after fitting.
About this 27mm sway bar
The SuperPro SHF7 heavy duty front sway bar is made from race-spec chromoly with a progressive design. It is designed to give daily, track and hobbyist cars better driving characteristics, with greater tyre grip in all driving situations and less body roll.
Application
| HOLDEN | H SERIES | 1971-1978 HQ, HJ, HX, HZ |
| HOLDEN | H SERIES | 1971-1978 HQ, HJ, HX, HZ Ute, Panel Van and One Tonner |
| HOLDEN | MONARO | 1971-1976 HQ, HJ |
| HOLDEN | MONARO | 1976-1980 HX, HZ |
| HOLDEN | STATESMAN | 1971-1980 HQ-HZ |
| HOLDEN | WB | 1980-1985 Ute and Panel Van |
SuperPro's sway bar range has been designed to provide daily, track, and hobbyist cars with better driving characteristics, increasing your vehicle's driving performance.
- Lifetime Warranty
- Greater Tyre Grip in all driving situations
- Designed and tested in Australia
- Better handling, sharper steering, and less body roll
- Race-spec Chromoly with progressive design
- 30% Lighter lower unsprung weight
SuperPro SHF7
Specifications
Kit
| Kit type | Front 27mm Sway Bar |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Sway Bar, 2 Bushings, 2 Brackets |
Sway bar
| Diameter (mm) | 27 |
|---|---|
| Diameter (in) Fraction | 1 1/16" |
| Material | Solid Spring Steel |
| Sway Bar Adjustment Type | Non Adjustable |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SHF7 |
|---|---|
| EAN | 9317745764038 |
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SHF7
Vehicle fitment
6 vehicles
- 27mm Non Adjustable
| Vehicle | Years | Position |
|---|---|---|
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front