Measurements (mm)× 4in kit
- Outer diameterOD63 mm
- Inner diameterID57 mm
- Length117 mm
- Flange thicknessFL11 mm
- Flange outer diameterFLOD20 mm
SuperPro rear spring insulator pad
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit4 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this spring insulator pad
The SuperPro SPF0089K rear spring insulator pad is designed to increase durability and vehicle longevity, a complete, premium upgrade. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. It enhances your vehicle's handling and performance. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Application
| HOLDEN | E SERIES | 1957-1962 FE, FC, FB, EK |
| HOLDEN | E SERIES | 1961-1965 EK, EJ, EH |
| HOLDEN | F SERIES | 1957-1962 FE, FC, FB, EK |
| HOLDEN | H SERIES | 1965-1968 HD, HR |
| HOLDEN | H SERIES | 1968-1969 HK |
| HOLDEN | H SERIES | 1969-1971 HT, HG |
| HOLDEN | MONARO | 1968-1971 HT, HG |
Note - to suit 59mm spring width
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0089K
Specifications
Kit
| Kit type | Rear Spring Insulator Pad (59mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0089K |
|---|---|
| EAN | 9317745000891 |
SuperPro SPF0089K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0089K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
SPF0089K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific note
Applies to every vehicle unless flagged
- Suits 59mm spring width
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden E SeriesEK, EJ, EH | 1961–1965 | Rear |
| Holden H SeriesHD, HR | 1965–1968 | Rear |
| Holden H SeriesHK | 1968–1969 | Rear |
| Holden H SeriesHT, HG | 1969–1971 | Rear |
| Holden MonaroHT, HGSuits59mm wide spring | 1968–1971 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$30.00
