SuperPro front bump stop bush kit
Key specs
- PositionFront axle
- Install time30 minutes
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this bump stop bush kit
The SuperPro SPF0114K front bump stop bush kit is a set of two polyurethane bump stop bushings for the front axle. It is a shortened design. The bushings are made from SuperPro's proprietary engineering-grade polyurethane, which is unaffected by extreme temperatures, oils, water and coolant.
Application
| HOLDEN | E SERIES | 1961-1965 EK, EJ, EH |
| HOLDEN | H SERIES | 1965-1968 HD, HR |
| HOLDEN | H SERIES | 1968-1969 HK |
| HOLDEN | H SERIES | 1969-1971 HT, HG |
| HOLDEN | MONARO | 1968-1971 HT, HG |
| HOLDEN | TORANA | 1969-1974 LC, LJ, TA |
| HOLDEN | TORANA GTR XU1 | 1969-1974 LC, LJ, TA |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0114K
Specifications
Kit
| Kit type | Front Bump Stop Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Bush dimensions
| OD (A) | 41 mm |
|---|---|
| Length (C) | 57 mm |
| Flange Thickness (D) | 10 mm |
| Flange OD (E) | 40 mm |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 30 minutes |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0114K |
|---|---|
| EAN | 9317745001140 |
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0114K
Vehicle fitment
6 vehicles
- Standard height
| Vehicle | Years | Position |
|---|---|---|
| Holden E SeriesEK, EJ, EH | 1961–1965 | Front |
| Holden H SeriesHD, HR | 1965–1968 | Front |
| Holden H SeriesHK | 1968–1969 | Front |
| Holden H SeriesHT, HG | 1969–1971 | Front |
| Holden MonaroHT, HG | 1968–1971 | Front |
| Holden ToranaLC, LJ, TAShortened - Suits LC and LJ models | 1969–1974 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Fitment position: Rear
