Measurements (mm)× 1in kit
- Outer diameterOD108 mm
- Inner diameterID55 mm
- Length38 mm
- Flange thicknessFL23 mm
- Flange outer diameterFLOD67 mm
SuperPro rear spring insulator
Key specs
- PositionRear axle
- Install time1.5 hours
- Kits required21 bushing
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this spring insulator
The SuperPro SPF0210-8K rear spring insulator is a coil spring seat and spacer bushing that raises the vehicle's ride height. It is made from SuperPro's own engineering-grade polyurethane, a quieter and longer lasting alternative to rubber that is unaffected by extreme temperatures, oils, water and coolant. Each kit contains a single insulator, and two kits are required.
Application
| HOLDEN | H SERIES | 1971-1978 HQ, HJ, HX, HZ |
| HOLDEN | MONARO | 1971-1976 HQ, HJ |
| HOLDEN | MONARO | 1976-1980 HX, HZ |
| HOLDEN | STATESMAN | 1971-1980 HQ-HZ |
| HOLDEN | STATESMAN | 1980-1985 WB |
Note - Raises vehicle approximately 4mm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0210-8K
Specifications
Kit
| Kit type | Rear Spring Insulator (8mm) |
|---|---|
| Kits required | 2 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0210-8K |
|---|---|
| EAN | 9317745700975 |
SuperPro SPF0210-8K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0210-8K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
SPF0210-8K
Vehicle fitment
8 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- 8mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Rear |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Rear |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Rear |
| Holden MonaroHQ, HJ | 1971–1976 | Rear |
| Holden MonaroHX, HZ | 1976–1980 | Rear |
| Holden StatesmanHQ, HJ | 1971–1976 | Rear |
| Holden StatesmanHX, HZ | 1976–1980 | Rear |
| Holden StatesmanWB | 1980–1985 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$30.00
