Measurements (mm)× 1in kit
- Outer diameterOD25.4 mm
- Inner diameterID13.2 mm
- Length26.4 mm
- Flange thicknessFL3.25 mm
- Flange outer diameterFLOD31 mm
SuperPro front engine steady mount bush kit
Key specs
- PositionFront axle
- Install time1.5 hours
- Kits required21 bushing
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this engine steady mount bush kit
The SuperPro SPF0213K front engine steady mount bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
2 bushes per arm required, some vehicles may have two arms
SuperPro SPF0213K
Specifications
Kit
| Kit type | Front Engine Steady Mount Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0213K |
|---|---|
| EAN | 9317745002130 |
SuperPro SPF0213K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0213K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0213K
Vehicle fitment
2 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Some models may have two arms
| Vehicle | Years | Position |
|---|---|---|
| Austin MiniMk1-Mk6 | 1959–1993 | Front |
| Morris MiniMini | 1960–1980 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
