Measurements (mm)× 2in kit
- Outer diameterOD64 mm
- Inner diameterID20 mm
- Length17 mm
- Flange thicknessFL29 mm
- Flange outer diameterFLOD42 mm
Centre tubeOD × ID × length, mm22.22 × 16.2 × 47× 2
SuperPro front caster rod to chassis bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this caster rod to chassis bush kit
The SuperPro SPF0240K front caster rod to chassis bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
SuperPro SPF0240K
Specifications
Kit
| Kit type | Front Caster Rod To Chassis Bush Kit (Street) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0240K |
|---|---|
| EAN | 9317745002406 |
SuperPro SPF0240K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0240K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0240K
Vehicle fitment
38 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| HDT CalaisVK, VL | 1984–1986 | Front |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Front |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Front |
| HDT CommodoreVS Aero | 1995–1997 | Front |
| HDT CommodoreVS Magnum | 1995–1997 | Front |
| Holden CalaisVK, VL | 1984–1988 | Front |
| Holden CalaisVN | 1988–1991 | Front |
| Holden CalaisVP | 1991–1993 | Front |
| Holden CalaisVR, VS | 1993–1997 | Front |
| Holden CapriceVQ | 1990–1994 | Front |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Front |
| Holden CommodoreVN, VP Sedan | 1988–1993 | Front |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Front |
| Holden CommodoreVR, VS Sedan | 1993–1997 | Front |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Front |
| Holden StatesmanVQ | 1990–1994 | Front |
| Holden StatesmanVR, VS | 1994–1999 | Front |
| HSV ClubsportVN | 1989–1991 | Front |
| HSV ClubsportVP | 1991–1993 | Front |
| HSV ClubsportVR-VS SEDAN | 1993–1997 | Front |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Front |
| HSV CommodoreVL GROUP A | 1988–1989 | Front |
| HSV CommodoreVN GROUP A | 1990–1991 | Front |
| HSV CommodoreVN, VP | 1989–1993 | Front |
| HSV GrangeVS | 1996–1999 | Front |
| HSV GTSVR, VS | 1993–1997 | Front |
| HSV LSVG, VP | 1991–1993 | Front |
| HSV MalooVG, VP | 1990–1993 | Front |
| HSV MalooVR, VS | 1993–2000 | Front |
| HSV MantaVS SEDAN | 1995–1997 | Front |
| HSV MantaVS WAGON | 1995–1997 | Front |
| HSV SenatorVP | 1992–1993 | Front |
| HSV SenatorVR, VS | 1993–1997 | Front |
| HSV StatesmanVQ | 1990–1993 | Front |
| Toyota LexcenVN, VP Sedan | 1987–1993 | Front |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Front |
| Toyota LexcenVR, VS Sedan | 1993–1997 | Front |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
