Measurements (mm)× 1in kit
- Outer diameterOD122 mm
- Inner diameterID93.5 mm
- Length10 mm
SuperPro front spring insulator
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit1 bushing
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this spring insulator
The SuperPro SPF0271-10K front upper spring insulator raises the vehicle's ride height. It is made from SuperPro's own engineering-grade polyurethane, a quieter and longer lasting alternative to rubber that is unaffected by extreme temperatures, oils, water and coolant. Each kit contains a single bushing.
Application
| HOLDEN | H SERIES | 1968-1969 HK |
| HOLDEN | H SERIES | 1969-1971 HT, HG |
| HOLDEN | H SERIES | 1971-1978 HQ, HJ, HX, HZ |
| HOLDEN | H SERIES | 1971-1978 HQ, HJ, HX, HZ Ute, Panel Van and One Tonner |
| HOLDEN | MONARO | 1968-1971 HT, HG |
| HOLDEN | MONARO | 1971-1976 HQ, HJ |
| HOLDEN | MONARO | 1976-1980 HX, HZ |
| HOLDEN | STATESMAN | 1971-1980 HQ-HZ |
| HOLDEN | STATESMAN | 1980-1985 WB |
| HOLDEN | WB | 1980-1985 Ute and Panel Van |
Note - raises vehicle approximately 20mm when fitted to the front axle and 10mm when fitted to the rear axle of the vehicle.
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0271-10K
Specifications
Kit
| Kit type | Front Spring Spacer (10mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0271-10K |
|---|---|
| EAN | 9317745701187 |
SuperPro SPF0271-10K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0271-10K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
SPF0271-10K
Vehicle fitment
13 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- 20mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHK | 1968–1969 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHT, HG | 1969–1971 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHT, HG | 1968–1971 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$30.00
