Measurements (mm)× 4in kit
- Outer diameterOD32 mm
- Inner diameterID22 mm
- Length30.5 mm
- Flange thicknessFL4.5 mm
- Flange outer diameterFLOD38 mm
Centre tubeOD × ID × length, mm22.22 × 16.5 × 65× 2
SuperPro front shock absorber lower bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this shock absorber lower bush kit
The SuperPro SPF0299K front shock absorber lower bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD AUSTRALIA | FAIRLANE | 1988-1995 NA, NC |
| FORD AUSTRALIA | FAIRLANE | 1995-1996 NF |
| FORD AUSTRALIA | FAIRLANE | 1996-1999 NL |
| FORD AUSTRALIA | FAIRLANE | 1999-2002 AU |
| FORD AUSTRALIA | FAIRLANE | 2003-2007 BA, BF |
| FORD AUSTRALIA | FALCON | 1988-1994 EA, EB, ED Sedan |
| FORD AUSTRALIA | FALCON | 1988-1994 EA, EB, ED Wagon |
| FORD AUSTRALIA | FALCON | 1994-1996 EF Sedan |
| FORD AUSTRALIA | FALCON | 1994-1996 EF Wagon |
| FORD AUSTRALIA | FALCON | 1996-1998 EL Sedan |
| FORD AUSTRALIA | FALCON | 1996-1998 EL Wagon |
| FORD AUSTRALIA | FALCON | 1996-1999 XH Ute and Van (Strut Front End) |
| FORD AUSTRALIA | FALCON | 1998-2002 AU Sedan IRS |
| FORD AUSTRALIA | FALCON | 1998-2002 AU Sedan Solid Rear Axle |
| FORD AUSTRALIA | FALCON | 1998-2002 AU Wagon, Ute and Cab Chassis |
| FORD AUSTRALIA | FALCON | 2002-2008 BA, BF Sedan |
| FORD AUSTRALIA | FALCON | 2002-2008 BA, BF Wagon, Ute and Cab Chassis |
| FORD AUSTRALIA | TERRITORY | 2004-2011 SX, SY AWD |
| FORD AUSTRALIA | TERRITORY | 2004-2011 SX, SY RWD |
| FORD AUSTRALIA | TERRITORY | 2011-2016 SZ AWD |
| FORD AUSTRALIA | TERRITORY | 2011-2016 SZ RWD |
Note - Bush located in lower control arm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0299K
Specifications
Kit
| Kit type | Front Shock Absorber Lower Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0299K |
|---|---|
| EAN | 9317745002994 |
SuperPro SPF0299K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0299K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0299K
Vehicle fitment
47 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Shock Absorber - Lower Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneAU | 1999–2002 | Front |
| Ford FairlaneBA, BF | 2003–2007 | Front |
| Ford FairlaneNA, NC | 1988–1995 | Front |
| Ford FairlaneNF | 1995–1996 | Front |
| Ford FairlaneNL | 1996–1999 | Front |
| Ford FairmontAU Sedan IRS | 1998–2002 | Front |
| Ford FairmontAU Sedan Solid Rear Axle | 1998–2002 | Front |
| Ford FairmontAU Wagon | 1998–2002 | Front |
| Ford FairmontBA, BF | 2002–2008 | Front |
| Ford FairmontEA, EB, ED Sedan | 1988–1994 | Front |
| Ford FairmontEA, EB, ED Wagon | 1988–1994 | Front |
| Ford FairmontEF Sedan | 1994–1996 | Front |
| Ford FairmontEF Wagon | 1994–1996 | Front |
| Ford FairmontEL Sedan | 1996–1998 | Front |
| Ford FairmontEL Wagon | 1996–1998 | Front |
| Ford FalconAU Sedan IRS | 1998–2002 | Front |
| Ford FalconAU Sedan Solid Rear Axle | 1998–2002 | Front |
| Ford FalconAU Wagon, Ute and Cab Chassis | 1998–2002 | Front |
| Ford FalconBA, BF Sedan | 2002–2008 | Front |
| Ford FalconBA, BF Wagon, Ute and Cab Chassis | 2002–2008 | Front |
| Ford FalconEA, EB, ED Sedan | 1988–1994 | Front |
| Ford FalconEA, EB, ED Wagon | 1988–1994 | Front |
| Ford FalconEF Sedan | 1994–1996 | Front |
| Ford FalconEF Wagon | 1994–1996 | Front |
| Ford FalconEL Sedan | 1996–1998 | Front |
| Ford FalconEL Wagon | 1996–1998 | Front |
| Ford FalconXH Ute and Van (Strut Front End) | 1996–1999 | Front |
| Ford LTDAU | 1999–2002 | Front |
| Ford LTDBA, BF | 2003–2007 | Front |
| Ford LTDDA, DC | 1987–1995 | Front |
| Ford LTDDF | 1995–1996 | Front |
| Ford LTDDL | 1996–1999 | Front |
| Ford TerritorySX, SY AWD | 2004–2011 | Front |
| Ford TerritorySX, SY RWD | 2004–2011 | Front |
| Ford TerritorySZ AWD | 2011–2016 | Front |
| Ford TerritorySZ RWD | 2011–2016 | Front |
| Ford TickfordTE 50 | 1999–2002 | Front |
| Ford TickfordTL 50 | 1999–2002 | Front |
| Ford TickfordTS 50 | 1999–2002 | Front |
| FPV CobraBF UTE | 2005–2007 | Front |
| FPV F6 SeriesBA, BF Torando | 2004–2008 | Front |
| FPV F6 SeriesBA Typhoon | 2004–2006 | Front |
| FPV F6XSYSold as: Shock Absorber - To Control Arm Bushing Kit | 2008–2009 | Front |
| FPV Force 6BF Sedan | 2005–2007 | Front |
| FPV Force 8BF Sedan | 2005–2007 | Front |
| FPV GT SeriesBA, BF GT, GT-E, GT-P, COBRA Sedan | 2003–2008 | Front |
| FPV Pursuit / Super PursuitBA, BF Ute | 2003–2008 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
