Measurements (mm)× 2in kit
- Outer diameterOD30 mm
- Inner diameterID15 mm
- Length54 mm
- Flange thicknessFL7 mm
- Flange outer diameterFLOD37.5 mm
Centre tubeOD × ID × length, mm16 × 10.2 × 55× 2
SuperPro front upper control arm, inner bush kit
Key specs
- PositionFront axle
- Install time1.5 hours
- Kits required22 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF0452K front upper control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Note - This part fits original factory pivot housings only
SuperPro SPF0452K
Specifications
Kit
| Kit type | Front Upper Control Arm - Inner Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0452K |
|---|---|
| EAN | 9317745004523 |
SuperPro SPF0452K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0452K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0452K
Vehicle fitment
19 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Suits OEM bracket
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneNA, NC | 1988–1995 | Front |
| Ford FairlaneNF | 1995–1996 | Front |
| Ford FairlaneNL | 1996–1999 | Front |
| Ford FairmontEA, EB, ED Sedan | 1988–1994 | Front |
| Ford FairmontEA, EB, ED Wagon | 1988–1994 | Front |
| Ford FairmontEF Sedan | 1994–1996 | Front |
| Ford FairmontEF Wagon | 1994–1996 | Front |
| Ford FairmontEL Sedan | 1996–1998 | Front |
| Ford FairmontEL Wagon | 1996–1998 | Front |
| Ford FalconEA, EB, ED Sedan | 1988–1994 | Front |
| Ford FalconEA, EB, ED Wagon | 1988–1994 | Front |
| Ford FalconEF Sedan | 1994–1996 | Front |
| Ford FalconEF Wagon | 1994–1996 | Front |
| Ford FalconEL Sedan | 1996–1998 | Front |
| Ford FalconEL Wagon | 1996–1998 | Front |
| Ford FalconXH Ute and Van (Strut Front End) | 1996–1999 | Front |
| Ford LTDDA, DC | 1987–1995 | Front |
| Ford LTDDF | 1995–1996 | Front |
| Ford LTDDL | 1996–1999 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
