Measurements (mm)× 4in kit
- Outer diameterOD36 mm
- Inner diameterID20 mm
- Length29 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD41 mm
Centre tubeOD × ID × length, mm20 × 14.2 × 60× 2
SuperPro control arm lower-front bush kit
Key specs
- PositionVaries by vehicle
- Install time2 hours
- Kits required24 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this control arm lower-front bush kit
The SuperPro SPF0506K control arm lower-front bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HOLDEN | ASTRA | 1987-1989 LD |
| NISSAN | EXA | 1987-1991 N13 |
| NISSAN | GAZELLE | 1984-1988 S12 |
| NISSAN | PULSAR | 1987-1991 N13 |
Note -remove original shell
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0506K
Specifications
Kit
| Kit type | Control Arm Lower-Front Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0506K |
|---|---|
| EAN | 9317745005063 |
SuperPro SPF0506K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0506K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0506K
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Front 4, Rear 1)1 vehicle-specific noteSold as differs on 5 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower-Front Bush Kit. 5 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HSV AstraLD SV1800Sold as: Control Arm Lower - Inner Front Bushing Kit | 1988–1989 | Front |
| Holden AstraLDSold as: Control Arm Lower - Inner Front Bushing Kit | 1987–1989 | Front |
| Nissan EXAN13Sold as: Control Arm Lower - Inner Front Bushing Kit | 1987–1991 | Front |
| Nissan GazelleS12Sold as: Control Arm Lower - Bushing KitSuits IRS models | 1984–1988 | Rear |
| Nissan PulsarN13Sold as: Control Arm Lower - Inner Front Bushing Kit | 1987–1991 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $48.33
Fitment position: Front
Sale price$65.67
Regular price$114.00
Save $177.23
Fitment position: Rear
Sale price$240.77
Regular price$418.00
Save $111.09
Fitment position: Rear
Sale price$150.91
Regular price$262.00
Save $52.56
Fitment position: Front
Sale price$71.44
Regular price$124.00