Measurements (mm)× 4in kit
- Outer diameterOD24.45 mm
- Inner diameterID12.7 mm
- Length11.7 mm
- Flange thicknessFL4.56 mm
- Flange outer diameterFLOD28 mm
Centre tubeOD × ID × length, mm12.7 × 8.2 × 24.5× 2
SuperPro rear sway bar link lower bush kit
Key specs
- PositionRear axle
- Install time48 minutes
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar link lower bush kit
The SuperPro SPF0513-4K rear sway bar link lower bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HOLDEN | CALAIS | 1991-1993 VP |
| HOLDEN | CALAIS | 1993-1997 VR, VS |
| HOLDEN | CALIBRA | 1991-1997 YE |
| HOLDEN | CAPRICE | 1990-1994 VQ |
| HOLDEN | CAPRICE | 1994-1999 VR, VS |
| HOLDEN | COMMODORE | 1988-1993 VG, VP Sedan |
| HOLDEN | COMMODORE | 1993-1997 VR, VS Sedan |
| HOLDEN | STATESMAN | 1990-02/1994 VQ |
| HOLDEN | STATESMAN | 1994-06/1999 VR, VS |
| HSV | CLUBSPORT | 1988-1993 VN-VP |
| HSV | CLUBSPORT | 1993-1997 VR-VS |
| HSV | COMMODORE | 1988-1993 VN-VP |
| HSV | GRANGE | 1993-1997 VR-VS |
| HSV | GTS | 1993-1997 VR-VS |
| HSV | MALOO | 1988-1993 VN-VP |
| HSV | MALOO | 1993-1997 VR-VS |
| HSV | MANTA | 1993-1997 VR-VS |
| HSV | SENATOR | 1988-1993 VN-VP |
| HSV | SENATOR | 1993-1997 VR-VS |
to suit IRS vehicles (Independent Rear Suspension)
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0513-4K
Specifications
Kit
| Kit type | Rear Sway Bar Link Lower Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 48 minutes |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0513-4K |
|---|---|
| EAN | 9317745712091 |
SuperPro SPF0513-4K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
3 year / 60,000kmSuperPro ball joints, tie rod ends, Duroballs and links are covered by a 3 year / 60,000km warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only.
This product: SPF0513-4K is protected by a 3 year / 60,000km warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0513-4K
Vehicle fitment
24 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear4 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden CalaisVP | 1991–1993 | Rear |
| Holden CalaisVR, VS | 1993–1997 | Rear |
| Holden CalibraYE | 1991–1997 | Rear |
| Holden CapriceVQ | 1990–1994 | Rear |
| Holden CapriceVR, VS | 1994–1999 | Rear |
| Holden CommodoreVN, VP SedanSuits IRS models | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits IRS models | 1993–1997 | Rear |
| Holden StatesmanVQ | 1990–1994 | Rear |
| Holden StatesmanVR, VS | 1994–1999 | Rear |
| HSV CapriceVR, VS | 1994–1996 | Rear |
| HSV ClubsportVP | 1991–1993 | Rear |
| HSV ClubsportVR-VS SEDAN | 1993–1997 | Rear |
| HSV GrangeVS | 1996–1999 | Rear |
| HSV GTSVR, VS | 1993–1997 | Rear |
| HSV MantaVS SEDAN | 1995–1997 | Rear |
| HSV SenatorVP | 1992–1993 | Rear |
| HSV SenatorVR, VS | 1993–1997 | Rear |
| HSV StatesmanVQ | 1990–1993 | Rear |
| HSV StatesmanVR, VS | 1994–1996 | Rear |
| Toyota LexcenVN, VP SedanSuits IRS models | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits IRS models | 1993–1997 | Rear |
| Vauxhall CalibraGM2900 | 1989–1997 | Rear |
| Vauxhall CarltonMk2 | 1977–1986 | Rear |
| Vauxhall CarltonMk3 | 1986–1994 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
