Measurements (mm)× 2in kit
- Outer diameterOD48.6 mm
- Inner diameterID22 mm
- Length43.8 mm
- Flange thicknessFL4 mm
- Flange outer diameterFLOD54.3 mm
Centre tubeOD × ID × length, mm22.22 × 16.2 × 45× 2
SuperPro rear trailing arm upper bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this trailing arm upper bush kit
The SuperPro SPF0593K rear trailing arm upper bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Note - Bush OD 48.5mm, tube length 45mm
SuperPro SPF0593K
Specifications
Kit
| Kit type | Rear Trailing Arm Upper Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0593K |
|---|---|
| EAN | 9317745005933 |
SuperPro SPF0593K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0593K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0593K
Vehicle fitment
16 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear8 vehicle-specific notesSold as differs on 7 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Trailing Arm Upper - Bushing Kit. 7 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi MagnaTE, TF Wagon | 1996–1999 | Rear |
| Mitsubishi MagnaTH, TJ Wagon | 1999–2003 | Rear |
| Mitsubishi MagnaTL, TW Wagon | 2003–2005 | Rear |
| Mitsubishi MagnaTM, TN, TP WagonSuits models with Borg Warner Diff | 1985–1991 | Rear |
| Mitsubishi MagnaTR, TS Wagon | 1991–1996 | Rear |
| Mitsubishi SigmaGESold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1977–1980 | Rear |
| Mitsubishi SigmaGHSold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1980–1982 | Rear |
| Mitsubishi SigmaGJ, GK, GN SedanSold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1982–1987 | Rear |
| Mitsubishi SigmaGJ, GK, GN WagonSold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1982–1987 | Rear |
| Mitsubishi Sigma ScorpionGESold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1977–1980 | Rear |
| Mitsubishi Sigma ScorpionGHSold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1980–1982 | Rear |
| Mitsubishi Sigma ScorpionGJ, GK, GL CoupeSold as: Trailing Arm Upper - Front Bushing KitSuits models with Borg Warner Diff | 1982–1985 | Rear |
| Mitsubishi VeradaKE, KF Wagon | 1996–1999 | Rear |
| Mitsubishi VeradaKJ, KH Wagon | 1999–2003 | Rear |
| Mitsubishi VeradaKL, KW Wagon | 2003–2005 | Rear |
| Mitsubishi VeradaKR, KS Wagon | 1991–1997 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $27.55
Fitment position: Front
Sale price$37.45
Regular price$65.00
Save $36.45
Fitment position: Front
Sale price$49.55
Regular price$86.00
Save $62.75
Fitment position: Front
Sale price$85.25
Regular price$148.00
Save $21.72
Fitment position: Front
Sale price$37.28
Regular price$59.00
Save $52.14
Fitment position: Rear
Sale price$70.86
Regular price$123.00
