Measurements (mm)× 6in kit
- Outer diameterOD32 mm
- Inner diameterID18 mm
- Length46 mm
- Flange thicknessFL6 mm
- Flange outer diameterFLOD40 mm
SuperPro front steering rack & pinion mount thrust washer
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit6 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF0752K front steering rack and pinion mount thrust washer is a set of six polyurethane bushings for the thrust washer position of the steering rack mounts. The original mounts are reused. The bushings are made from SuperPro's proprietary engineering-grade polyurethane, which is unaffected by extreme temperatures, oils, water and coolant.
Note - re-use original mounts
SuperPro SPF0752K
Specifications
Kit
| Kit type | Front Steering Rack & Pinion Mount Thrust Washer |
|---|---|
| Kits required | 1 |
| Components per kit | 6 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0752K |
|---|---|
| EAN | 9317745007524 |
SuperPro SPF0752K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0752K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0752K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Daimler 2.8 - 5.3Sovereign, Double Six | 1969–1993 | Front |
| Daimler CoupeSovereign | 1973–1987 | Front |
| Jaguar XJMK1-MK3 | 1968–1992 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
