Measurements (mm)× 4in kit
- Outer diameterOD25.4 mm
- Inner diameterID15 mm
- Length21 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD31 mm
Centre tubeOD × ID × length, mm16 × 12.8 × 45× 2
SuperPro rear control arm bush kit
Key specs
- PositionRear axle
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this control arm bush kit
The SuperPro SPF0808AK rear control arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| TRIUMPH | GT6 | 1959-1980 Spitfire, Herald, GT6 |
| TRIUMPH | GT6 | 1966-1972 Mk I-II-III |
| TRIUMPH | HERALD | 1959-1980 Spitfire, Herald, GT6 |
| TRIUMPH | HERALD | 1961-1967 1200 |
| TRIUMPH | HERALD | 1967-1971 13/60 |
| TRIUMPH | HERALD | 1968-1969 1200 |
| TRIUMPH | ITALIA | 1968-1969 1200 |
| TRIUMPH | SPITFIRE | 1959-1980 Spitfire, Herald, GT6 |
| TVR | TUSCAN | 1967-1970 V8 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0808AK
Specifications
Kit
| Kit type | Rear Control Arm Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0808AK |
|---|---|
| EAN | 9317745707745 |
SuperPro SPF0808AK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0808AK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0808AK
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear3 vehicle-specific notesSold as differs on 2 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Inner Bushing Kit. 2 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- 12.7mm ID
- Suits GT6 MK2 and Vitesse Rotoflex
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Triumph GT6Mk I-II-III12.7mm ID - Suits MK2 and Vitesse Rotoflex | 1966–1973 | Rear |
| Triumph Italia2000 | 1959–1963 | Rear |
| Triumph SpitfireSpitfire | 1962–1980 | Rear |
| TVR Griffith 400V8Sold as: Control Arm - Bushing KitSuits models with 12.7mm ID Rear lower outer bush | 1965–1965 | Rear |
| TVR TuscanV8Sold as: Control Arm Lower - Outer Bushing KitSuits models with 12.7mm ID Rear lower outer bush | 1967–1970 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
