Measurements (mm)× 4in kit
- Outer diameterOD38 mm
- Inner diameterID11 mm
- Length14 mm
- Flange thicknessFL2.2 mm
- Flange outer diameterFLOD18.8 mm
SuperPro pin bush kit
Key specs
- PositionVaries by vehicle
- Supplied as1 kit4 bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this pin bush kit
The SuperPro SPF0809-70K pin bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement. The low-compliance polyurethane controls flex, twist and deflection for a firmer, more connected feel without the harshness of solid mounts.
SuperPro SPF0809-70K
Specifications
Kit
| Kit type | Pin Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0809-70K |
|---|---|
| EAN | 9317745708957 |
SuperPro SPF0809-70K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0809-70K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0809-70K
Vehicle fitment
19 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Rear 16, Front 3)2 vehicle-specific notesSold as differs on 19 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Pin Bush Kit. 19 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford CapriCoupeSold as: Shock Absorber - Upper Bushing Kit | 1969–1974 | Rear |
| Jaguar Mk IXMk IXSold as: Shock Absorber - Upper Bushing Kit | 1959–1961 | Rear |
| Jaguar Mk VIIMK 7Sold as: Shock Absorber - Upper Bushing Kit | 1950–1958 | Rear |
| Jaguar XK120Sold as: Shock Absorber - Upper Bushing Kit | 1948–1954 | Rear |
| Jaguar XK140Sold as: Shock Absorber - Upper Bushing Kit | 1954–1957 | Rear |
| Jaguar XK150Sold as: Shock Absorber - Upper Bushing Kit | 1957–1960 | Rear |
| Jensen InterceptorMK IISold as: Panhard Rod - Bushing Kit | 1969–1973 | Rear |
| Marcos MarcosV4, V6Sold as: Shock Absorber - Lower Bushing Kit | 1969–1971 | Rear |
| Rover 2000-3500P6Sold as: Shock Absorber - Bushing KitLarge - Suits 2.2 and V8 models | 1963–1976 | Rear |
| TVR 280I280iSold as: Sway Bar To Hub - Bushing Kit | 1983–1986 | Front |
| TVR 350I350iSold as: Sway Bar To Hub - Bushing Kit | 1983–1989 | Front |
| TVR TasminTASMINSold as: Sway Bar To Hub - Bushing Kit | 1980–1984 | Front |
| Triumph 2.5 PIMK1, MK2Sold as: Shock Absorber - Bushing Kit | 1968–1975 | Rear |
| Triumph 2000MK1, MK2Sold as: Shock Absorber - Bushing Kit | 1968–1977 | Rear |
| Triumph 2500TCSold as: Shock Absorber - Bushing Kit | 1974–1977 | Rear |
| Triumph StagSeries 3Sold as: Shock Absorber - Bushing Kit | 1970–1977 | Rear |
| Triumph TR 4ATR4ASold as: Shock Absorber - Bushing KitSuits Lever arm shock absorber | 1965–1967 | Rear |
| Triumph TR 7TR7Sold as: Shock Absorber - Bushing Kit | 1976–1981 | Rear |
| Triumph TR 8TR8Sold as: Shock Absorber - Bushing Kit | 1976–1981 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
