Measurements (mm)× 4in kit
- Outer diameterOD40 mm
- Inner diameterID18 mm
- Length26.5 mm
- Flange thicknessFL7.5 mm
- Flange outer diameterFLOD48 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 55× 2
SuperPro control arm bush kit
Key specs
- PositionVaries by vehicle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this control arm bush kit
The SuperPro SPF0823-4K control arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
SuperPro SPF0823-4K
Specifications
Kit
| Kit type | Control Arm Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0823-4K |
|---|---|
| EAN | 9317745704836 |
SuperPro SPF0823-4K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0823-4K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0823-4K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Front 1, Rear 2)No vehicle-specific notesSold as differs on 3 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Bush Kit. 3 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi GalantHJSold as: Control Arm Lower - Inner Bushing Kit | 1992–1996 | Front |
| Toyota MR2AW1_Sold as: Trailing Arm Lower - Front Bushing Kit | 1984–1990 | Rear |
| Toyota MR2SW2_Sold as: Trailing Arm Lower - Front Bushing Kit | 1989–2000 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $48.33
Fitment position: Front
Sale price$65.67
Regular price$114.00
Save $177.23
Fitment position: Rear
Sale price$240.77
Regular price$418.00
Save $111.09
Fitment position: Rear
Sale price$150.91
Regular price$262.00
Save $52.56
Fitment position: Front
Sale price$71.44
Regular price$124.00