Measurements (mm)× 8in kit
- Outer diameterOD40 mm
- Inner diameterID18 mm
- Length26.5 mm
- Flange thicknessFL7.5 mm
- Flange outer diameterFLOD48 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 55× 4
SuperPro rear trailing arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit8 bushings, 4 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this trailing arm bush kit
The SuperPro SPF0823K rear trailing arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| HOLDEN | APOLLO | 1989-1993 JK, JL |
| HOLDEN | APOLLO | 1993-1997 JM, JP |
| HOLDEN | NOVA | 1989-1997 LE, LF, LG |
| HYUNDAI | COUPE | 1996-2002 RD |
| HYUNDAI | ELANTRA | 2006-2011 HD |
| HYUNDAI | LANTRA | 1995-2000 J2 Sedan And Sportswagon |
| LEXUS | ES | 1991-1997 V10 |
| TOYOTA | AVALON | 1995-2005 MCX1_ |
| TOYOTA | CAMRY | 1982-1987 V10, V11 |
| TOYOTA | CAMRY | 1987-1993 V20, V21, V22 |
| TOYOTA | CAMRY | 1993-1997 XV10 |
| TOYOTA | CAMRY | 1997-2002 XV20 |
| TOYOTA | CAMRY | 2002-2006 XV30 |
| TOYOTA | CELICA | 1986-1989 ST165 Turbo AWD |
| TOYOTA | CELICA | 1987-1989 ST162 |
| TOYOTA | CELICA | 1989-1993 ST185 Turbo AWD |
| TOYOTA | CELICA | 1989-1994 AT180, ST182, ST184 |
| TOYOTA | COROLLA | 1985-1989 E80, E82 |
| TOYOTA | COROLLA | 1987-1995 E90, E92, E93, E94 |
| TOYOTA | COROLLA | 1991-1998 E101 |
| TOYOTA | COROLLA | 1994-1999 E102 |
| TOYOTA | COROLLA | 1998-2001 E110, E111, E112 |
| TOYOTA | COROLLA SECCA | 1994-1999 E102 |
| TOYOTA | CORONA | 1987-1992 ST170 |
| TOYOTA | KLUGER | 2000-2007 _U2_ |
| TOYOTA | VIENTA | 1997-2002 SXV20 |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0823K
Specifications
Kit
| Kit type | Rear Trailing Arm Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0823K |
|---|---|
| EAN | 9317745008231 |
SuperPro SPF0823K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0823K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0823K
Vehicle fitment
30 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Holden ApolloJK, JL | 1989–1993 | Rear |
| Holden ApolloJM, JP | 1993–1997 | Rear |
| Holden NovaLE, LF, LG | 1989–1997 | Rear |
| Hyundai CoupeRD | 1996–2002 | Rear |
| Hyundai ElantraHD | 2006–2011 | Rear |
| Hyundai i30FD | 2007–2012 | Rear |
| Hyundai LantraJ2 Sedan & Sportswagon | 1995–2000 | Rear |
| Lexus ESV10 | 1991–1997 | Rear |
| Lexus ESV20 | 1996–2001 | Rear |
| Lexus ESV30 | 2001–2008 | Rear |
| Toyota AvalonMCX1_ | 1995–2005 | Rear |
| Toyota CamryV10, V11 | 1982–1987 | Rear |
| Toyota CamryV20, V21, V22 | 1987–1993 | Rear |
| Toyota CamryXV10 | 1993–1997 | Rear |
| Toyota CamryXV20 | 1996–2002 | Rear |
| Toyota CamryXV30 | 2001–2006 | Rear |
| Toyota CelicaAT180, ST182, ST184 | 1989–1994 | Rear |
| Toyota CelicaST162 | 1987–1989 | Rear |
| Toyota CelicaST165 Turbo AWD | 1986–1989 | Rear |
| Toyota CelicaST185 Turbo AWD | 1989–1993 | Rear |
| Toyota CorollaE101 | 1991–1998 | Rear |
| Toyota CorollaE102 | 1994–1999 | Rear |
| Toyota CorollaE110, E111, E112 | 1998–2001 | Rear |
| Toyota CorollaE80, E82 | 1985–1989 | Rear |
| Toyota CorollaE90, E92, E93, E94 | 1987–1995 | Rear |
| Toyota Corolla SeccaE102 | 1994–1999 | Rear |
| Toyota CoronaST170 | 1987–1992 | Rear |
| Toyota Highlander_U4_ | 2007–2013 | Rear |
| Toyota Kluger_U2_ | 2000–2007 | Rear |
| Toyota VientaSXV20 | 1997–2002 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
