Measurements (mm)× 8in kit
- Outer diameterOD28 mm
- Inner diameterID19 mm
- Length19.5 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD38 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 4019 × 12.3 × 50× 2 / 2
SuperPro rear lower control arm, outer bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit8 bushings, 4 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF0825K rear lower control arm outer bush kit is a polyurethane upgrade or replacement for the outer pivot of the rear lower control arm. The kit comes with bushings and tubes. It is made from SuperPro's own engineering-grade polyurethane, a quieter and longer lasting alternative to rubber that is unaffected by extreme temperatures, oils, water and coolant.
Application
| HOLDEN | NOVA | 1989-1997 LE, LF, LG |
| HYUNDAI | COUPE | 1996-2002 RD |
| HYUNDAI | LANTRA | 1995-2000 J2 Sedan And Sportswagon |
| TOYOTA | CAMRY | 1982-1987 V10, V11 |
| TOYOTA | COROLLA | 1985-1989 E80, E82 |
| TOYOTA | COROLLA | 1987-1995 E90, E92, E93, E94 |
-
8 Bushes OD 28mm, ID 19mm, Length 14.5mm
2 Tubes OD 19mm, ID 12.mm, Length 50mm,
2 Tubes OD 19mm, ID 12.3mm, Length 40mm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0825K
Specifications
Kit
| Kit type | Rear Lower Control Arm - Outer Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0825K |
|---|---|
| EAN | 9317745008255 |
SuperPro SPF0825K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0825K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0825K
Vehicle fitment
6 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notesSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Outer Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden NovaLE, LF, LG28mm OD | 1989–1997 | Rear |
| Hyundai CoupeRDSold as: Control Arm Lower Front - Bushing Kit, Control Arm Lower Rear - Bushing Kit | 1996–2002 | Rear |
| Hyundai LantraJ2 Sedan & SportswagonSold as: Control Arm Lower Front - Bushing Kit, Control Arm Lower Rear - Bushing Kit | 1995–2000 | Rear |
| Toyota CamryV10, V11Sold as: Control Arm Upper - Outer Bushing Kit | 1982–1987 | Rear |
| Toyota CorollaE80, E82Sold as: Control Arm - Outer Bushing Kit | 1985–1989 | Rear |
| Toyota CorollaE90, E92, E93, E9428mm OD - Suits AE92, AE93 and AE94 models | 1987–1995 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
