Measurements (mm)× 4in kit
- Outer diameterOD41 mm
- Inner diameterID27.3 mm
- Length34 mm
- Flange thicknessFL8 mm
- Flange outer diameterFLOD50 mm
Centre tubeOD × ID × length, mm27 × × 22 × 70× 2
SuperPro rear control arm, inner toe kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF0877TK rear control arm inner toe kit is engineered for everyday reliability, a complete, premium upgrade. It enhances your vehicle's handling and performance. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. Developed, tested and designed in Australia for greater quality in manufacturing and engineering.
Application
| HOLDEN | CALAIS | 1991-1993 VP |
| HOLDEN | CALAIS | 1993-1997 VR, VS |
| HOLDEN | CALAIS | 1997-2000 VT |
| HOLDEN | CALAIS | 2000-2002 VX |
| HOLDEN | CAPRICE | 1990-1994 VQ |
| HOLDEN | CAPRICE | 1994-1999 VR, VS |
| HOLDEN | CAPRICE | 1999-2003 WH |
| HOLDEN | CAPRICE | 2003-2004 WK |
| HOLDEN | CAPRICE | 2004-2006 WL |
| HOLDEN | COMMODORE | 1988-1993 VG, VP Sedan |
| HOLDEN | COMMODORE | 1993-1997 VR, VS Sedan |
| HOLDEN | COMMODORE | 1997-2000 VT Sedan and Wagon |
| HOLDEN | COMMODORE | 2000-2002 VU Ute |
| HOLDEN | COMMODORE | 2000-2002 VX Sedan and Wagon |
| HOLDEN | STATESMAN | 1990-02/1994 VQ |
| HOLDEN | STATESMAN | 1994-06/1999 VR, VS |
| HOLDEN | STATESMAN | 1999-04/2003 WH |
| HSV | CLUBSPORT | 1991-1993 VP |
| HSV | CLUBSPORT | 1993-1997 VR-VS SEDAN |
| HSV | CLUBSPORT | 1997-2000 VT |
| HSV | CLUBSPORT | 2000-2002 VX |
| HSV | COMMODORE | 1988-1993 VN-VP |
| HSV | COUPE 4 | 2002-2007 VY-VZ |
| HSV | GRANGE | 1993-1997 VR-VS |
| HSV | GRANGE | 1999-2003 WH |
| HSV | GTO | 2002-2007 VY-VZ |
| HSV | GTS | 1993-1997 VR-VS |
| HSV | GTS | 1997-2000 VT |
| HSV | GTS | 2000-2002 VX |
| HSV | GTS | 2002-2007 VY-VZ |
| HSV | MALOO | 1988-1993 VN-VP |
| HSV | MALOO | 1993-1997 VR-VS |
| HSV | MALOO | 2000-2002 VU |
| HSV | MALOO | 2002-2007 VY-VZ |
| HSV | MANTA | 1993-1997 VR-VS |
| HSV | MANTA | 1997-2000 VT |
| HSV | SENATOR | 1988-1993 VN-VP |
| HSV | SENATOR | 1993-1997 VR-VS |
| HSV | SENATOR | 1997-2000 VT |
| HSV | SENATOR | 2000-2002 VX |
| HSV | SENATOR | 2002-2007 VY-VZ |
| HSV | SV300 | 2000-2002 VX |
| HSV | XU6 | 1997-2000 VT |
| HSV | XU6 | 2000-2002 VX |
| HSV | XU8 | 1997-2000 VT |
Â
Note - Suited to vehicles without Factory Toe Adjusting Arm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0877TK
Alignment
- Alignment affectedToe
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
SuperPro SPF0877TK
Specifications
Kit
| Kit type | Rear Control Arm - Inner Toe Kit (IRS) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0877TK |
|---|---|
| EAN | 9317745708162 |
SuperPro SPF0877TK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0877TK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0877TK
Vehicle fitment
48 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear13 vehicle-specific notes
Applies to every vehicle unless flagged
- IRS adjusting toe kit
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreVT Sport | 1997–2000 | Rear |
| HDT CommodoreVX Areo SignatureSuits models to - 07/2001 | 2000–2002 | Rear |
| Holden CalaisVP | 1991–1993 | Rear |
| Holden CalaisVR, VS | 1993–1997 | Rear |
| Holden CalaisVT | 1997–2000 | Rear |
| Holden CalaisVXSuits models to - 07/2001 | 2000–2002 | Rear |
| Holden CapriceVQ | 1990–1994 | Rear |
| Holden CapriceVR, VS | 1994–1999 | Rear |
| Holden CapriceWHSuits models to - 07/2001 | 1999–2003 | Rear |
| Holden CapriceWK | 2003–2004 | Rear |
| Holden CapriceWL | 2004–2006 | Rear |
| Holden CommodoreVN, VP SedanSuits IRS models | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits IRS models | 1993–1997 | Rear |
| Holden CommodoreVT Sedan and Wagon | 1997–2000 | Rear |
| Holden CommodoreVU Ute | 2000–2002 | Rear |
| Holden CommodoreVX Sedan and WagonSuits models to - 07/2001 | 2000–2002 | Rear |
| Holden StatesmanVQ | 1990–1994 | Rear |
| Holden StatesmanVR, VS | 1994–1999 | Rear |
| Holden StatesmanWHSuits models to - 07/2001 | 1999–2003 | Rear |
| HSV CapriceVR, VS | 1994–1996 | Rear |
| HSV ClubsportVP | 1991–1993 | Rear |
| HSV ClubsportVR-VS SEDAN | 1993–1997 | Rear |
| HSV ClubsportVT | 1997–2000 | Rear |
| HSV ClubsportVXSuits models to - 08/2001 | 2000–2002 | Rear |
| HSV GrangeVS | 1996–1999 | Rear |
| HSV GrangeWHSuits models to - 08/2001 | 1999–2003 | Rear |
| HSV GTSVR, VS | 1993–1997 | Rear |
| HSV GTSVT | 1997–2000 | Rear |
| HSV MalooVU | 2001–2002 | Rear |
| HSV MantaVS SEDAN | 1995–1997 | Rear |
| HSV MantaVT | 1997–1999 | Rear |
| HSV SenatorVP | 1992–1993 | Rear |
| HSV SenatorVR, VS | 1993–1997 | Rear |
| HSV SenatorVT | 1997–2000 | Rear |
| HSV SenatorVXSuits models to - 08/2001 | 2000–2002 | Rear |
| HSV SenatorZ SERIES | 2004–2006 | Rear |
| HSV StatesmanVQ | 1990–1993 | Rear |
| HSV StatesmanVR, VS | 1994–1996 | Rear |
| HSV SV300VX | 2001–2001 | Rear |
| HSV SV99VT | 1999–2000 | Rear |
| HSV XU6VT | 1998–2000 | Rear |
| HSV XU6VXSuits models to - 08/2001 | 2000–2002 | Rear |
| HSV XU8VT | 1999–1999 | Rear |
| Toyota LexcenVN, VP SedanSuits IRS models | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits IRS models | 1993–1997 | Rear |
| Vauxhall CalibraGM2900 | 1989–1997 | Rear |
| Vauxhall CarltonMk2 | 1977–1986 | Rear |
| Vauxhall CarltonMk3 | 1986–1994 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$190.00
