Measurements (mm)× 4in kit
- Outer diameterOD40 mm
- Inner diameterID20 mm
- Length23.5 mm
- Flange thicknessFL8.5 mm
- Flange outer diameterFLOD45 mm
Centre tubeOD × ID × length, mm20 × 12.3 × 50× 2
SuperPro rear lower trailing arm, front bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF0907K rear lower trailing arm front bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD AUSTRALIA | CAPRI | 1989-1994 SA, SC, SE |
| FORD AUSTRALIA | LASER | 1990-1994 KF - KH |
| FORD AUSTRALIA | LASER | 1994-1999 KJ, KL |
| FORD AUSTRALIA | LASER | 1999-2002 KN, KQ |
| HYUNDAI | ELANTRA | 2000-2006 XD |
| MAZDA | 323 | 1989-1994 BG inc Astina |
| MAZDA | 323 ASTINA | 1989-1994 BG |
| MAZDA | 323 ASTINA | 1994-1998 BA Astina |
| MAZDA | 323 ASTINA | 1998-2004 BJ Astina |
| MAZDA | 323 PROTEGE | 1994-1998 BA Protege |
| MAZDA | 323 PROTEGE | 1998-2004 BJ Protege |
| MAZDA | 626 | 1998-2002 GF |
| MAZDA | 626 | 1998-2002 GW |
| MAZDA | FAMILIA | 1989-2000 Familia BG |
| MAZDA | PREMACY | 1999-2005 CP |
Note - 40mm OD
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0907K
Specifications
Kit
| Kit type | Rear Lower Trailing Arm - Front Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0907K |
|---|---|
| EAN | 9317745009078 |
SuperPro SPF0907K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0907K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0907K
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notesSold as differs on 2 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Trailing Arm Lower - Front Bushing Kit. 2 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford CapriSA, SC, SE40mm OD | 1989–1994 | Rear |
| Ford LaserKF - KH | 1990–1994 | Rear |
| Ford LaserKJ, KL | 1994–1999 | Rear |
| Ford LaserKN, KQ | 1999–2002 | Rear |
| Mazda 323 AstinaBA Astina | 1994–1998 | Rear |
| Mazda 323 AstinaBG | 1989–1994 | Rear |
| Mazda 323 AstinaBJ Astina | 1998–2004 | Rear |
| Mazda 323BG inc Astina | 1989–1994 | Rear |
| Mazda 323 ProtegeBA Protege | 1994–1998 | Rear |
| Mazda 323 ProtegeBJ Protege | 1998–2004 | Rear |
| Mazda 626GFSold as: Trailing Arm Lower - Rear Bushing Kit | 1998–2002 | Rear |
| Mazda 626GWSold as: Trailing Arm Lower - Rear Bushing Kit | 1998–2002 | Rear |
| Mazda FamiliaFamilia BG | 1989–2000 | Rear |
| Mazda PremacyCP40mm OD | 1999–2005 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $48.33
Fitment position: Front
Sale price$65.67
Regular price$114.00
Save $177.23
Fitment position: Rear
Sale price$240.77
Regular price$418.00
Save $111.09
Fitment position: Rear
Sale price$150.91
Regular price$262.00
Save $52.56
Fitment position: Front
Sale price$71.44
Regular price$124.00