- Outer diameterOD26 mm
- Inner diameterID19.8 mm
- Length27.8 mm
- Flange thicknessFL2.7 mm
- Flange outer diameterFLOD32.8 mm
- Outer diameterOD26 mm
- Inner diameterID19.8 mm
- Length27.9 mm
- Flange thicknessFL3.3 mm
- Flange outer diameterFLOD29.2 mm
SuperPro front idler arm bush kit
The SuperPro SPF0936K front idler arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Note - 29mm OD bush
SuperPro SPF0936K
| Kit type | Front Idler Arm Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 2 Bushings. 1 Tube & Sleeve |
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
| SKU | SPF0936K |
|---|---|
| EAN | 9317745009368 |
SuperPro SPF0936K
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
This SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0936K
For most vehicles this part is sold as Steering Idler Arm - Upper Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneZA, ZB | 1967–1969 | Front |
| Ford FairlaneZC, ZD | 1969–1972 | Front |
| Ford FairlaneZF, ZG | 1972–1976 | Front |
| Ford FairlaneZH | 1976–1979 | Front |
| Ford FairlaneZJ | 1979–1982 | Front |
| Ford FairlaneZK, ZL | 1982–1988 | Front |
| Ford FairmontXA, XB Sedan and Coupe | 1972–1976 | Front |
| Ford FairmontXA, XB Wagon | 1972–1976 | Front |
| Ford FairmontXC Sedan and Coupe | 1976–1979 | Front |
| Ford FairmontXC Wagon | 1976–1979 | Front |
| Ford FairmontXD Sedan | 1979–1982 | Front |
| Ford FairmontXD Wagon | 1979–1982 | Front |
| Ford FairmontXE, XF Sedan | 1982–1988 | Front |
| Ford FairmontXE, XF Wagon | 1982–1988 | Front |
| Ford FairmontXP SedanSold as: Steering Idler Arm - Bushing Kit29mm OD | 1965–1966 | Front |
| Ford FairmontXP WagonSold as: Steering Idler Arm - Bushing Kit29mm OD | 1965–1966 | Front |
| Ford FairmontXR, XT Sedan | 1967–1969 | Front |
| Ford FairmontXR, XT Wagon | 1967–1969 | Front |
| Ford FairmontXW, XY Sedan | 1969–1972 | Front |
| Ford FairmontXW, XY Wagon | 1969–1972 | Front |
| Ford FalconXA, XB | 1972–1976 | Front |
| Ford FalconXC | 1976–1979 | Front |
| Ford FalconXD | 1979–1982 | Front |
| Ford FalconXE, XF Sedan | 1982–1988 | Front |
| Ford FalconXE, XF Wagon, Ute and Van | 1982–1993 | Front |
| Ford FalconXG Ute and Van (Shock Front End) | 1993–1996 | Front |
| Ford FalconXK-XPSold as: Steering Idler Arm - Bushing Kit29mm OD | 1960–1966 | Front |
| Ford FalconXR-XT | 1966–1969 | Front |
| Ford FalconXW, XY | 1969–1972 | Front |
| Ford LandauP5, P6 | 1973–1979 | Front |
| Ford LTDFC | 1979–1982 | Front |
| Ford LTDFD, FE | 1982–1988 | Front |
| Ford LTDP5, P6 | 1973–1979 | Front |
| Ford MustangClassic 1st GenSold as: Steering Idler Arm - Bushing Kit29mm OD | 1964–1973 | Front |
No vehicles match.
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.