Measurements (mm)× 1in kit
- Outer diameterODAI38mmAII30mm
- Inner diameterID19.8 mm
- Length32 mm
- Flange thicknessFL4 mm
Centre tubeOD × ID × length, mm20 × 16.5 × 33× 1
SuperPro rear panhard rod to diff mount bush kit
Key specs
- PositionRear axle
- Install time1 hour
- Supplied as1 kit1 bushing, 1 tube
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this panhard rod to diff mount bush kit
The SuperPro SPF0963K rear panhard rod to diff mount bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| TOYOTA | CELICA | 1971-1976 TA22 |
| TOYOTA | CELICA | 1976-1977 RA23, RA28 |
| TOYOTA | CELICA | 1977-1981 RA40 |
| TOYOTA | COROLLA | 1979-1987 E70, E71, E72 |
| TOYOTA | COROLLA | 1983-1987 E86 |
| TOYOTA | COROLLA | 1987-1995 E90, E92, E93, E94 |
| TOYOTA | COROLLA | 1988-1995 E95 |
| TOYOTA | COROLLA SPRINTER | 1983-1987 E86 |
| TOYOTA | CORONA | 1979-1983 XT130 |
| TOYOTA | CORONA | 1983-1987 ST141, RT142 |
| TOYOTA | CRESSIDA | 1977-1981 MX32 |
| TOYOTA | CRESSIDA | 1981-1985 MX62 |
| TOYOTA | CRESSIDA | 1985-1988 MX73 |
| TOYOTA | CROWN | 1966-1980 MS55-65-75-85-95 |
| TOYOTA | CROWN | 1979-1983 MS11_ |
| TOYOTA | TARAGO | 1982-1990 YR20, 21, 22, CR21 And YR31 |
| TOYOTA | TERCEL | 1982-1986 AL2_ |
Note - Tube ID 16mm
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF0963K
Specifications
Kit
| Kit type | Rear Panhard Rod To Diff Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Bushing, 1 Tube |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF0963K |
|---|---|
| EAN | 9317745009634 |
SuperPro SPF0963K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF0963K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF0963K
Vehicle fitment
16 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Toyota CelicaRA23, RA28 | 1976–1977 | Rear |
| Toyota CelicaRA40 | 1977–1981 | Rear |
| Toyota CelicaTA22 | 1971–1976 | Rear |
| Toyota CorollaE70, E71, E72 | 1979–1987 | Rear |
| Toyota CorollaE8616mm ID | 1983–1987 | Rear |
| Toyota CorollaE90, E92, E93, E94 | 1987–1995 | Rear |
| Toyota CorollaE95 | 1988–1995 | Rear |
| Toyota Corolla SprinterE8616mm ID | 1983–1987 | Rear |
| Toyota CoronaST141, RT142 | 1983–1987 | Rear |
| Toyota CoronaXT130 | 1979–1983 | Rear |
| Toyota CressidaMX32 | 1977–1981 | Rear |
| Toyota CressidaMX62 | 1981–1985 | Rear |
| Toyota CrownMS11_ | 1979–1983 | Rear |
| Toyota CrownMS55-65-75-85-95 | 1966–1980 | Rear |
| Toyota TaragoYR20, 21, 22, CR21 & YR31 | 1982–1990 | Rear |
| Toyota TercelAL2_ | 1982–1988 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
