Measurements (mm)× 2in kit
- Outer diameterOD64 mm
- Inner diameterID22 mm
- Length66.5 mm
- Flange thicknessFL14.25 mm
- Flange outer diameterFLOD70 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 69.5× 2
SuperPro front lower caster arm
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this lower caster arm
The SuperPro SPF1202K front lower caster arm bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
69.5mm long crush tube, bracket width 40mm
SuperPro SPF1202K
Specifications
Kit
| Kit type | Front Lower Caster Arm - Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1202K |
|---|---|
| EAN | 9317745012023 |
SuperPro SPF1202K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1202K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1202K
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Standard Alignment
| Vehicle | Years | Position |
|---|---|---|
| Infiniti Q45G50 | 1990–1997 | Front |
| Nissan 180SXS13 | 1988–1996 | Front |
| Nissan 200SXS14 | 1993–1999 | Front |
| Nissan 200SXS15 | 2000–2003 | Front |
| Nissan 300ZXZ32 | 1989–1997 | Front |
| Nissan InfinitiG50 | 1990–1997 | Front |
| Nissan SilviaS13 | 1988–1996 | Front |
| Nissan SilviaS14 | 1993–1999 | Front |
| Nissan SkylineR32 RWD | 1989–1993 | Front |
| Nissan SkylineR33 RWD | 1993–1998 | Front |
| Nissan SkylineR34 RWD | 1998–2000 | Front |
| Nissan StageaWGC34 RWD | 1996–2001 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
