Measurements (mm)× 1in kit
- Outer diameterOD62.65 mm
- Inner diameterID21 mm
- Length64.5 mm
- Flange thicknessFL13.5 mm
- Flange outer diameterFLOD66 mm
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit2 control arm bushings & sleeves
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF1367K front lower control arm rear bush kit single offset is engineered with strength and durability in mind, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. It enhances your vehicle's handling and performance.
Steering Pull Correction Kit Slide on mount peg
SuperPro SPF1367K
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF1367K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit - Single Offset |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings & Sleeves |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1367K |
|---|---|
| EAN | 9317745013679 |
SuperPro SPF1367K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1367K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1367K
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Steering-Pull Correction
- Suits models with slide on pin without lock nut
- Adds +0.5deg caster
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi MagnaTE, TF Sedan | 1996–1999 | Front |
| Mitsubishi MagnaTE, TF Wagon | 1996–1999 | Front |
| Mitsubishi MagnaTH, TJ Sedan | 1999–2003 | Front |
| Mitsubishi MagnaTH, TJ Wagon | 1999–2003 | Front |
| Mitsubishi MagnaTL, TW Sedan | 2003–2005 | Front |
| Mitsubishi MagnaTL, TW Wagon | 2003–2005 | Front |
| Mitsubishi VeradaKE, KF Sedan | 1996–1999 | Front |
| Mitsubishi VeradaKE, KF Wagon | 1996–1999 | Front |
| Mitsubishi VeradaKJ, KH Sedan | 1999–2003 | Front |
| Mitsubishi VeradaKJ, KH Wagon | 1999–2003 | Front |
| Mitsubishi VeradaKL, KW Sedan | 2003–2005 | Front |
| Mitsubishi VeradaKL, KW Wagon | 2003–2005 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
