Measurements (mm)× 4in kit
- Outer diameterODAI30mmAII27mm
- Inner diameterID15.5 mm
- Length32 mm
- Flange thicknessFL3 mm
- Flange outer diameterFLOD34 mm
Centre tubeOD × ID × length, mm16 × 10.4 × 34× 4
SuperPro rear sway bar link bush kit
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit4 bushings, 4 tubes
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this sway bar link bush kit
The SuperPro SPF1384AK rear sway bar link bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
30mm OD Bush
SuperPro SPF1384AK
Specifications
Kit
| Kit type | Rear Sway Bar Link Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1384AK |
|---|---|
| EAN | 9317745706083 |
SuperPro SPF1384AK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
3 year / 60,000kmSuperPro ball joints, tie rod ends, Duroballs and links are covered by a 3 year / 60,000km warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only.
This product: SPF1384AK is protected by a 3 year / 60,000km warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1384AK
Vehicle fitment
10 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Subaru ForesterSF | 1997–2002 | Rear |
| Subaru ImprezaGC, GF Sedan and Wagon | 1992–2000 | Rear |
| Subaru ImprezaGD Sedan | 2000–2007 | Rear |
| Subaru ImprezaGG Wagon | 2000–2007 | Rear |
| Subaru ImprezaWRX GC, GF Sedan & Wagon | 1992–2000 | Rear |
| Subaru ImprezaWRX GD Sedan | 2000–2008 | Rear |
| Subaru ImprezaWRX GG Wagon | 2000–2008 | Rear |
| Subaru ImprezaWRX STi GC, GF Sedan & Wagon | 1992–2000 | Rear |
| Subaru LegacyBD, BG, BK30mm OD | 1994–1999 | Rear |
| Subaru LibertyBD, BG, BK30mm OD | 1994–1999 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
