Measurements (mm)× 2in kit
- Outer diameterOD56.15 mm
- Inner diameterID29 mm
- Length51.3 mm
- Flange thicknessFL4.5 mm
- Flange outer diameterFLOD44.25 mm
Centre tubeOD × ID × length, mm30X25-20.3X51× 2
SuperPro front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2b, 2t, 2s control arm bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this part
The SuperPro SPF1387K front lower control arm rear bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| SUBARU | FORESTER | 1997-2002 SF |
| SUBARU | FORESTER | 2002-2008 SG |
| SUBARU | IMPREZA | 1992-2000 GC, GF Sedan and Wagon |
| SUBARU | IMPREZA | 1992-2000 WRX GC, GF Sedan And Wagon |
| SUBARU | IMPREZA | 1992-2000 WRX STi GC, GF Sedan And Wagon |
| SUBARU | IMPREZA | 2000-2007 GD Sedan |
| SUBARU | IMPREZA | 2000-2007 GG Wagon |
| SUBARU | IMPREZA | 2000-2008 WRX GD Sedan |
| SUBARU | IMPREZA | 2000-2008 WRX GG Wagon |
| SUBARU | IMPREZA | 2001-2005 WRX STi GD Sedan |
| SUBARU | IMPREZA | 2005-2007 WRX STi GD Sedan |
| SUBARU | LEGACY | 1994-1999 BD, BG, BK |
| SUBARU | LEGACY | 1998-2003 BE, BH, BT |
| SUBARU | LIBERTY | 1989-1994 BC, BJ, BF |
| SUBARU | LIBERTY | 1994-1999 BD, BG, BK |
| SUBARU | LIBERTY | 1998-2003 BE, BH, BT |
| SUBARU | LIBERTY OUTBACK | 1998-2003 BE, BH, BT |
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1387K
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 2b, 2t, 2s Control Arm Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1387K |
|---|---|
| EAN | 9317745013877 |
SuperPro SPF1387K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1387K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1387K
Vehicle fitment
17 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Standard Alignment
| Vehicle | Years | Position |
|---|---|---|
| Subaru ForesterSF | 1997–2002 | Front |
| Subaru ForesterSG | 2002–2008 | Front |
| Subaru ImprezaGC, GF Sedan and Wagon | 1992–2000 | Front |
| Subaru ImprezaGD Sedan | 2000–2007 | Front |
| Subaru ImprezaGG Wagon | 2000–2007 | Front |
| Subaru ImprezaWRX GC, GF Sedan & Wagon | 1992–2000 | Front |
| Subaru ImprezaWRX GD Sedan | 2000–2008 | Front |
| Subaru ImprezaWRX GG Wagon | 2000–2008 | Front |
| Subaru ImprezaWRX STi GC, GF Sedan & Wagon | 1992–2000 | Front |
| Subaru ImprezaWRX STi GD Sedan | 2001–2005 | Front |
| Subaru ImprezaWRX STi GD Sedan | 2005–2007 | Front |
| Subaru LegacyBD, BG, BK | 1994–1999 | Front |
| Subaru LegacyBE, BH | 1998–2003 | Front |
| Subaru LibertyBC, BJ, BF | 1989–1994 | Front |
| Subaru LibertyBD, BG, BK | 1994–1999 | Front |
| Subaru LibertyBE, BH, BT | 1998–2003 | Front |
| Subaru OutbackBH | 1998–2003 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
