Measurements (mm)× 4in kit
- Outer diameterODAI32.5mmAII32mm
- Inner diameterID19 mm
- Length38.75 mm
- Flange thicknessFLDI10.75mmDII1mm
- Flange outer diameterFLOD45 mm
Centre tubeOD × ID × length, mm19 × 12.3 × 38.2× 4
SuperPro front upper control arm, inner bush kit
Key specs
- PositionFront axle
- Install time4 hours
- Supplied as1 kit4b, 4t, 4s control arm bushings
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The SuperPro SPF1401K front upper control arm inner bush kit replaces soft factory rubber, which is designed for ride comfort and noise isolation but over time softens, cracks and allows excess movement that dulls handling and can affect alignment. The low-compliance polyurethane controls flex, twist and deflection for sharper steering response, more consistent geometry under load and a more connected, predictable feel without the harshness of solid mounts.
Application
| FORD | GRANADA | 1972-1985 Mk1, Mk2 |
| FORD AUSTRALIA | CORTINA | 1970-1983 Mk 3, Mk 4, Mk 5 |
| FORD AUSTRALIA | CORTINA | 1972-1977 TC, TD |
| FORD GERMANY | GRANADA | 1972-1985 Mk 1 And Mk 2 |
| FORD UK | CORTINA | 1970-1983 Mk3, Mk4, Mk5 |
| FORD UK | GRANADA | 1985-1994 Mk3 |
| TVR | TASMIN | 1980-1991 Wedges |
Notes - 12mm ID Tube / 32mm shell
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances vehicle handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed in Australia
SuperPro SPF1401K
Specifications
Kit
| Kit type | Front Upper Control Arm - Inner Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 4b, 4t, 4s Control Arm Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF1401K |
|---|---|
| EAN | 9317745014010 |
SuperPro SPF1401K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF1401K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF1401K
Vehicle fitment
8 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notesSold as differs on 2 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Upper - Inner Bushing Kit. 2 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford CortinaMk3, Mk4, Mk5Sold as: Control Arm Upper - Bushing KitSuits 4cyl models | 1970–1983 | Front |
| Ford CortinaTC, TDSold as: Control Arm Upper - Bushing KitSuits 4cyl models | 1972–1977 | Front |
| Ford GranadaMk 1 & Mk 2 | 1972–1985 | Front |
| Ford GranadaMk1, Mk2 | 1972–1985 | Front |
| Ford GranadaMk3 | 1985–1994 | Front |
| TVR 280I280i | 1983–1986 | Front |
| TVR 350I350i | 1983–1989 | Front |
| TVR TasminTASMIN | 1980–1984 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Rear
Sale price$418.00
Fitment position: Rear
Sale price$262.00
